F R E E – R E P A I R – E S T I M A T E S http://www.carstereohelp.com/ FORD, MERCURY, MERCEDES, AUDI, MAZDA.
F R E E – R E P A I R – E S T I M A T E S http://www.carstereohelp.com/ FORD, MERCURY, MERCEDES, AUDI, MAZDA.
You must be logged in to post a comment.
){kind=link}
Totaly different removal process. See the website mentioned on the video
for the removal.
2006 Ford Escape 6 CD changer stuck, where do u get those tools from that
was in this video?? so i can try to reset the radio
you think improvising with a wire hanger would work?
@mellen92 it WILL work, but the ford tool WORKS!!! INSTANTLY and you will
save your anger for a rainier day
@boblizcou THANKS
Nice video. I would recommend that you set the lighting so that the
exposure is for the inside of the car as it is difficult to see the clips
as it was so dark.
If there are two holes on each side of the stereo face, the removal should
be the same.
thanks man, me and and my friend have been trying to get my ford escape
radio out for the longest time, i now know how, we can put my touch screen
radio and subs and 12’s in now
my car doesn’t have the holes
Thanks man, that helps a lot
Just tried this on my 99 Mustang and it worked perfectly. I have been
trying to get it out for a while now but could never get it to work.
Thanks!!
Thanks for the video! I didn’t know that when you pulled the radio out, you
had to pull the removal tool towards the outside of the radio. This video
is really helpful, Thanks!
Does it work on A Ford F 150 truck 2004?
Very well demonstrated/explained. Kudos.
What if the springs are broken? I purchased the tool, removed the stereo
once, put it back, tried to remove the stereo again, and now it won’t come
out. Any tips?
Some wire harness information is available on the website. If you are
installing an aftermarket stereo, this information is not needed if you
purchase the correct wire harness. This will also save you the headache of
attempting to find the wire code then cutting wires to hope you have it
right. If your looking for power? Try a meter or test light.
A think metal coart hanger, for nails, but the correct tool works best.
hey bud i got a 92 lincoln its got one of those factory amps i just wanna
know how where are the wires for the door speakers?
Most auto part stores sell them.
Omg thank-you for posting this video! 🙂
my jaw dropped..
what the tool on the right side wont slide in or click or any thing? i push
and push and it just wont lock it to place and can pull it right out with
out any thing stopping it from exiting?
The coat hanger trick can be a pain. I have tried ti. If you insert too far
it will not work. Well, at least my attempts (many) did not get to Mr.
Happy. So, to keep your sanity and buy the tool. It will make your life
better…
The lock springs on the side of the stereo are missing or bent out of shape
from previous removals?
We used the removal tool and our radio would NOT budge!! We were really
frustrated and nothing seemed to be working. I finally figured out that we
were pushing the tool in too far! If you are having this problem, only
insert the removal tool until it makes a first little click, then pull the
tools out to the sides BEFORE you try to pull in out. Ours came right out
and I couldn’t believe how easy it was!!! So, if you are having the same
difficulty, take a deep breath, and try again!!! 🙂
True there were no screws. I just was separating the tools enough when I
was trying to pull it out. But I got it now. Thanks.
Thanks for this step-by-step guide.