how to Replace steering stabilizer on a 1997 w202 mercedes c-230..all other c-class models should be similar.
Mercedes w202 c-class steering stabilizer replacement
9
Like
Save
){kind=link}
- Tags:
CClass, Mercedes, Replacement, stabilizer, steering, w202
- Categories: Mercedes-Benz
Comments
Write a comment
You must be logged in to post a comment.
$21 for a Sachs damper at rockauto…$220 is nuts
Hey man thanks for the video. I just got quoted $220 for a stabilizer. Like you said they should only cost about 25. Lol
thanks ,i’ll try it.
these videos helped me a lot,i had a problem with the windshield wiper.i solved it.thanks again.
thanks ,i’ll try it.
these videos helped me a lot,i had a problem with the windshield wiper.i solved it.thanks again.
it will if your stabilizer is worn…if you remove 1 of the bolts from either end you will be able to feel if the stabilizer is worn out..suspension bushings can cause a bit of looseness as well but not as much as the stabilizer or tie rods will…check your steering box mounting bolts as well…there are 3 or 4 (4 if I remember correctly) behind the spring inside the wheelwell on the drivers side…14mm I think…check tie rods as well for sloppiness
hello ,does the installing a new steering stabilizer take out the looseness on the steering wheel,ex:when you turn right or left the car doesn’t response as you turn the steering wheel,you have to turn a little more.
sorry,maybe didn’t express very well,i’m not english,i hope you understood me.
i’m waiting for a response.
thanks