Corey from IDParts fixes a grinding Mercedes E320 sunroof motor
http://www.idparts.com/
Mercedes Grinding Sunroof Fix
33,403
Like
Save
){kind=link}
- Tags:
grinding, Mercedes, Sunroof
- Categories: Mercedes-Benz
Comments
Write a comment
You must be logged in to post a comment.
Thanks for the deafening intro music..wake up the nieghbors and roommates!!! speaker blowing NOISE!! (Good info.)
Thx. Is this the same for an R-Class Pano roof as well? Also what size spring washer did you use?
thanks it helped me so much because my sunroof is stuck while being open
Rockstar video….
Is there difference about normal sunroof motor and panoramic roof motor? Or is IT the same ?
Thank you for info, I did close my roof, but other side of motor can't fix it, please tell me what to do, also mirror can not put it back, show me trick to do this two things.
Do you know how to replace front sunroof sunshade? Thanks
I would like to thank you for helping all of us in this issue. It worked for me. now for the people asking about key fob turn put the key in and turn it once to the right. That's what I did and it worked.
can u post a video for the 2004 kompressor Coupe sunroof?
Thanks! I followed your instructions and was able to close the sunroof which was stuck open. The washer didn't make the grind go away, but I was able to crank the motor and close the roof. I noticed that if I pushed up with the screwdriver on the motor crank, it would go in a bit and the grind would go away. But as soon as I let up on pressure, it would pop out again. Also, I couldn't figure out how to make the shades return to closed. Anyway, awesome video! It saved me hundreds!
Congrats to this very good documentation!
Is this also applicable to the moonroof of the W251 (R-class)?
best regards from Germany, Stefan
WOW Can't be more pleased with the instructions to make this repair on my '06-W211 Pano. In my case I used (2) flat washers stacked and a 1/4" dia. o-ring. Not possible to get to the other T25, to much obstruction. Tightened up the other smaller Torx scews.Tested before reassembly and no chatter. Getting the mirror back was tricky. I put a little grease on the socket area & spring ends, worked the spring with a pair of channel locks then had to fix the mirror in place before resetting the control panel. Got the mirror spring & socket in place then pushed with a flathead screw driver to over come the spring tension and it popped/locked in place. Then went the control panel. After all back together "re-programmed the sunroof" and all working normally. MB dealer would have charged a ton of money to do this, SPECIAL NOTE: Be extra careful with ribbon wires while control panel is hanging. THANKS ID Parts!!!
thats for a grinding pano?
mate I start to love my car agin :)))))) thanks
i have ti figure our how to find the source of the problem in my 08 c300 sunroof its stuck on one corner now and moves a inch
Thanks… Worked perfect saved me a lot of money…Was a little hard to get to outside screw