How to install new pads and rotors on a Mazda MX5 Miata ND1 ND2 ND3 with Brembos – Ferodo DS2500
In this video I will be installing Ferodo DS2500 front and rear pads together with new Centric Preimum rotors on my 2019 Mazda MX5 Miata ND2.
I have previously been running Carbotech XP10/XP8 combination but mainly the dust has put me off! I am not doing to many track days so the DS2500 will be a good compromise for harder street driving and some track use!
Front caliper bolts:79-101NM(59-74 ft-lbs)
Rear caliper bolts: 20-25NM(15-18 ft-lbs)
Caliper bracket bolts: 51-66NM(38-48 ft-lbs)
Link to workshop manual: https://www.hexorcism.com/16ND/sc3329/
Pin punch set:
https://amzn.to/47jmeV9
Tool to retract rear pistons:
https://amzn.to/4dQR61G
Clampss for front pistons:
https://amzn.to/3XyRdcj
Ceramic paste:
https://amzn.to/3XyGfUl
https://amzn.to/4gfKgUU
Silicone grease
https://amzn.to/4gj5vFA
https://amzn.to/4ed6Lbj
){kind=link}
would you mind sharing the pin punch tool and the tool to retract that rear piston? Also, is there anything to grease on the fronts?
What do you think of the DS2500? I noticed that they bite pretty poorly when cold, which isn't ideal since I installed them on my daily.
First Hahaha! Yesssss!