2014 MAZDA 3 2.5L HOW TO REPLACE REAR BRAKE PADS & ROTORS (MADE IN JAPAN) DIY

2014 MAZDA 3 2.5L HOW TO REPLACE REAR BRAKE PADS & ROTORS (MADE IN JAPAN) DIY

https://amzn.to/3Wo6HNW – Disc Brake Piston Caliper Compressor Rewind Tool Set (Specialty rear caliper wind back tool) I recommend you get this tool before starting this job.
https://amzn.to/3fmNbQX – Versachem 26080 Synthetic Caliper Grease
https://amzn.to/3DPk9mu – GEARWRENCH 12 Piece GearBox 12 Point XL Ratcheting Double Box Wrench Set, Metric – 85988
https://amzn.to/3UbTAxs – Milwaukee 2567-20 M12 FUEL Brushless Lithium-Ion 3/8 in. Cordless High Speed Ratchet
https://amzn.to/3fo0alD – Milwaukee 2560-20 M12 FUEL 3/8″ Extended Ratchet
https://amzn.to/2ZBs7u5 – GearWrench Torque Wrench used in video
https://amzn.to/2ZyyHl7 – Brake Cleaner
https://amzn.to/3T40p3b – Wire Wheels for drill
https://amzn.to/3Dp4zwF – Permatex 80078 Anti-Seize Lubricant with Brush Top Bottle, 8 oz.
https://amzn.to/3zCGEZA – Permatex Threadlocker 6 Ml Blue
https://amzn.to/3sIqz0v – Milwaukee Safety Glasses
https://amzn.to/3NtOCdi – [Front & Rear] Detroit Axle – Ceramic Brake Pads with Hardware Replacement for 2014-2016 Mazda 3 3 Sport – Japan Built Manual Parking Brake Models – 4pc Set
https://amzn.to/3TUW17C – Power Stop 17-1729, Z17 Rear Ceramic Brake Pads with Hardware

We got the brake pads and rotors at our local O’reilly Auto Parts Store.

Just a quick video showing how to replace the rear brake pads & Brake Rotors on a 2014 Mazda 3 2.5L Japan Built. You will need to check your vin number to determine if your vehicle is built in Mexico or not. Thankfully our local O’reilly Auto Parts Store was able to look it up for us and determine which parts we needed.

Tools needed:
A large screwdriver or prybar
13 mm Wrench or socket with ratchet and/or breaker bar
14 mm socket or wrench with breaker bar or impact wrench
brake caliper grease
wire brush or drill with wire brush attachment (wear safety glasses)
anti-seize
Torque Wrench
Torque specs I found online:
Caliper slide pin bolts 17-19 ft lbs
Caliper Support Bracket bolts 38-48 ft lbs.

I also did the front brakes on this same vehicle. Here’s a video of that if you need it: https://youtu.be/IMdk7ionE3w

Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman

Song used in the video:
‘Poolside Radio’ by Dyalla

As an Amazon Associate I earn from qualifying purchases.

57
Like
Save


Comments

volvogt21 says:

You've done it again Dan. Thanks

Comments are disabled for this post.