This UNIDEN 2830 needs a new reverse polarity protection diode fitting, i imagine it has been cross wired as i have seen so many times over the years which i…
This UNIDEN 2830 needs a new reverse polarity protection diode fitting, i imagine it has been cross wired as i have seen so many times over the years which i…
You must be logged in to post a comment.
 SIMPLE & EASY REPAIR.')){kind=link}
Thanks, I enjoy your videos! (PS: Correct name of the diode is
“one-en-4003”, not “eye-en-4003”.)
my first view of the 2830
Been offered one of these as p/x still not convinced. Video has helped with
decision. Many thanks. Keep it real. Dj1
Damn, that’s talkin’ station you have there. Back around 1990 I bought a
70′ Rohn-25 tower for a $100. I put a 10′ mast at the top and ran my
barefoot HR2510 off it using a nice Turner Plus Three mic and man lemme
tell ya that was a talkin’ station! Now I’m stuck in a damn apartment and
have to hide a Solarcon antenna in a small oak tree a whopping 20′ off the
ground, a far-cry from the setup I once had. If you’ve still got a good
setup enjoy it while you can. You never know what can happen.
Have a HR2510 peaks @ 30 watts on SSB, Astatic 1104C desk mic, a 667V into
a IMAX 5/8 @ 100 ft above grd. 259DXCC.