Sometimes, bad welds can come from incorrect machine set up. Dan Klingman goes over some common mistakes that can lead to poor weld quality and tells you how to correct them. Though this demo is done on the SP-140T wire feed welder, it can apply to several other portable MIG machines. For more information on the SP-140T, go to http://www.lincolnelectric.com/en-us/Equipment/Pages/product.aspx?product=K2688-1
Why didn’t you tell the viewers to use knurled wire feed rollers when using innershield wire?
These tips helped me remove some wire that was stuck in the gun hose. Thanks a bunch!
Why does my 135 only weld a few seconds before tripping its own breaker? Welded fine at first with gas set up. Outta gas so using flux core. Please help.
what is the difference between spatter and splatter?
Just bought one it gave up on me in the middle of the job after a while I try it and it work again I don't know if I should return it to home Depot or give it a chance
We bought 255, its worst welding machine i worked with. Its made in Poland, maby thats why?
Lincoln 140 is absolute junk , I have one for sale cheap
hi I have a mig welder 175 and the motor impulsor the whaier no work what happenig
Great show! Thxs!
Jesus Christ dude you look like a fucking power ranger. You bozo.
Very Informative video great tips
Nice video ! Thank you!
I have a lincoln 125 hd wire feed welder that doesn't weld in the A, B, C power selection but it does in D position. Only a small spark comes from A, B, C. It was working well. I looked for any loose cable connections and every looks ok. What I can do next. JOSE
My handy electric mig won't spark but turns on ,the fan kicks on but won't arc!
I used my Lincoln 140 for the first time today. After my first weld the spool feeder got stuck. I gave the trigger a few pumps and the POOF! A puff of black smoke came out the back and now it wont work. What happened?
I've got the lincoln 140HD that has a low spark output no matter the setting. Also "slows down"….Like undervoltage kin d of slow down. Sounds like it's struggling to operate. I am a 30 year electrical contractor and know I have good power. Any Idea?
Hi, I have a Lincoln SP-170T and the wire speed knob has broken. (The plastic stalk that runs from the back of the knob to the machine snapped) and I want to replace the plastic stalk how do I get on there to remove the remain stalk? Thanks in advance!
I have a welder that turns on an when i press the trigger it just clicks and wont feed any idea of what that would be?
Lincoln makes good equipment that's what I learned on how to weld in school that was 20 years ago I use miller now that's because my work supplies it but Lincoln is A+ equipment
I have a Weld-Pak 140 HD that runs but won't feed wire. I have checked all the connections and they seem tight. I have only used this welder 3 times. There shouldn't be a problem with this little use. I is kept under a blanket when not used. Anyone have any ideas?
whats the difference between this machine and the Lincoln Weld Pak 140 HD????
i have a problem with my power mig 180c i didn't use it for a long time since i bought it, and now the problem is when i pull the trigger the wire feed continuously even i stop pulling it….. any help???
good video I like the tips Ty
give him a 10