In this video we will teach you how to program your lincoln keyless entry remotes. This will work on all Lincoln Aviators, Blackwoods, Navigators, Continenta…
In this video we will teach you how to program your lincoln keyless entry remotes. This will work on all Lincoln Aviators, Blackwoods, Navigators, Continenta…
You must be logged in to post a comment.
Worked perfectly; thank you. Only the lift gate isn’t working when I press the button.
THANK YOU VERY MUCH MY LINCOLN TOWN CAR 1998 WORK TO ACTIVATE THANK YOU I APRICCIATE
What about 1995?????
Hi Gordon, I have a navigator 03 with a factory starter, I loose my remote, I buy one on eBay and say was compatible with the navi, I try to program but no luck, any suggestions ??
thank you very much, good job.
There is no reprogram for the keyless entry pad, please see my other broadcast. so…you don’t have the actual code or the system is inoperative. Check the hinges for the deck lid for a small white sticker with 5 digits printed on it, that is the code. Hope the sticker lasted 20 years.
how about reprograming the keyless entry pad on a 93 towncar.. i have the code but it doesnt work pleaseeee help!!!
It worked on my second try thank u very much
The LS is the oddball….you must take your car to the dealer to have the remotes programed.
what about the Lincoln LS… I have a 2002 and need to program a remote
كذاب
ابلﻷ
Thanks
not that I’m aware of
Will it work with after market remotes?
Please try the process several times, starting the car and turning it off, opening and closing the drivers door inbetween ignition cycles. If it still doesn’t work…visit your local Ford/Lincoln dealer.
I did this on my 2000 Navigator and it didnt work what do i do now?
I did this on my 2000 Navigator and it didnt work what do i do now?
yes
*navigator
It works on 2000 navif
No, the LS requires software to program. Visit your local Lincoln dealer.
I have an 2004 Lincoln LS would this work with it?
Actually on a 2004 MGM you key cycle from OFF to RUN FOUR times instead of eight. I made a video on it…
It should
Does this also work on the 2004 grand marquis gs?
I followed up on your concern. Only two things could be wrong, 1. the remote is no good. 2. The security module in the car is no good. Since it seems that you have determned the remote is good…get the car to a good technician.
Hello hopefully you could help me with my situation. I recently bought a 2007 ford mustang, it only came with one key (no remote), I bought a remote from an authorized ford dealer and followed your video and it didn’t work. The car will go on its programming and the remote just won’t program. I know the remote works b/c I tried it on another car and it worked. If you could help I’d really apreciate it. Thank you!
Okay if you find out could you let me know? Thanks. By the way i love ford vehicles i was just wandering cause on of my friends has a extra gmc remote.
-Ford For Life 🙂
I don’t know. Never tried, never had a reason.
Okay thanks. Would a gmc truck remote work on a ford?
Possibly…especially if they are Mark LT remotes. F150 remotes are usually 3 button and most Lincoln remotes are 4 or 5 button. Therefore…most Lincoln remotes will not work with your Ford F150.
Will Lincoln remotes work on my 2002 f150 ? If so is it the same process. BTW my f150 is the super crew lariat
Ok thank you.
No…the LS is the only car that requires an IDS to program. Take your car to the local Ford/Lincoln dealership.
This work on a 2003 Lincoln LS?
Just wanted to say THANK YOU for posting this video instruction, … It was very easy to follow, and it worked like a charm for me.
God can help you. I’m going to suggest that you take the car to the Ford/Lincoln dealer and have a certified technician properly diagnose your concern. There are numerous thing that could have gone wrong with the battery install, let alone components that fail on 10 year old cars. As experienced as I am, I cannot diagnose concerns over the internet.
GOD I HOPE YOU CAN HELP ME i bought a 2002 Lincoln towncar and it drove fine i replaced the battery do to it was the org one but nothing was wrong with it just old after replacing it the car will not start at all i checked the fule rail and no gas comes out and the reset for the fule pump did not trip any ideas ? the car is in exelent shape now a paper weight to me
Turns out that the remote I was sent was faulty. It was transmitting RF, but it had the wrong PC board in the shell for my car. I got a different remote and it programmed in about 2 seconds like it is supposed to.
I just watched this and have to give kudos to Costa Mesa Lincoln Mercury for posting this. I know a lot of dealers love making the quick $50 per remote to do a programming. Putting this simple video just saved a whole lot of people money that could have ended up in less scrupulous dealer’s pockets! Good Job guys!
You can clear the DDM by entering the program mode. No computer necessary. Based on the information provided you have a remote problem. Check with the parts department to make sure the remoted you have are compatible with your vehicle.
I tested the remote at a parts house, the test receiver showed that it was transmitting RF.
When I put the car into programming mode and hit a button nothing happens. The remote I had (which I lost) worked fine.
I have been told by multiple techs that you can only program 4 remotes before they have to clear the ddm with the computer.
If the system goes into programming mode the module should be OK and the problem is with the remotes. I have never seen a “reset” on a security module. I have seen a module that will not go into the programming sequence that was unplugged and then plugged back in and then it worked. Hope this helps. I shared your post with several Ford Senior Master Technicians and thier opinion was the same.
I’m having the same issue with a 2001. From what I understand, you can only program up to 4 remotes. When I contacted a dealer, they told me that I had to bring my car in so they could reset the module via the shop computer. Not sure of the validity of that, I’m kind of wondering if there is a way to do that myself.
nope i cycled the key 8-10 time and nothing happend,,,
It’s one of two things…Bad batteries or wrong remotes
Whoops, read the wrong username. That was a question meant for @costamesalm. Car goes into programming mode but remotes do not program. Any suggestions?