See the build pics here: http://www.stevemeadedesigns.com/board/topic/142076-ubl-lexus-is-f-sound-system-install-box-started-1-smd-15-updated-5912/page__pid_…
See the build pics here: http://www.stevemeadedesigns.com/board/topic/142076-ubl-lexus-is-f-sound-system-install-box-started-1-smd-15-updated-5912/page__pid_…
You must be logged in to post a comment.
its funny that u were head gear for the build but not for the tahoe and 4
18’s
Port too short.
That tight
that nos in the back
Thats one sick ass box man.. whats a good wood to make a box with and the
size thightness
Testing lexus build quality I see lol hope it doesn’t rattle apart the
trunk
im only 14 but i have an extreme obsession with bass and subwoofer and i
would rly like to build my own but,i dont have supplys anyway i love bass
and these dudes builds
I seen lots of your work but i never seen you make a push-pull box on a
car. You should make one it would sound sik
Fully committed
yea i kno., my bd1500 had a rating of 17 somethin @ 2 ohms so i kno RF amps
are powerful as hell..
I like the ear plugs when you’re grinding as if the bass is much quieter
lmao 🙂
Thats alot of excusion Steve!
Were can i get a smd?
didn’t cut the frame
Do you think you could tell me the size of that box for a 12 inch pioneer
comp? If you dont mind
this is for my bass only steve & I love my low bass….
woofers rated at 3500rms but i put 6000+ on them daily no problems.
hey meade can i have one of those old woofers you have laying around
actualy anything that is old and laying around lol
hello, Can you help me with a box for my subwoofer acoustic 15 “inches
hypnotic zen I want deep bass no matter the space is for a ford aerostar I
want a huge drawer to get this kind of bass I send you the specifications
of the subwoofer (FS) 29.8 Hz (Qts.) .59 (Qms) 5 (VAS) 95.4 L (Xmax) .36
(Re) .95 ohms (Pe)? 750/1500 (QES) .55 (Sens) 89 dB The subwoofer measures
15.6 inches / 39.5 cm in diameter 8.5 inches / 21.6cm height I want deep
bass! greetings from mexico city!
Is it bad that I want a similar install for a Mercury Sable?
I thought them NOS tanks were Subwoofers… Kidding Steve! Nice build 🙂
is it safe to have that right beside your n2o bottle?
Yo Steve ive got a question. Ive got a Hifonics Olympusn rated at 3200 max
and 1600 rms which i know aint much to your standards LOL im running it
with a hifonics 1500 HFI Mono at 1ohm in a box about the same size as that
one so im pushing a full 1500 rms to it, and the thing hits HARD. but i
want it louder without having to sacrifice more room since i have a car.
Ive heard polyfill or insulation helps but id want your advice first. any
tips? id appreciate it thanks!!
dont listen to these clowns man, you’re doin your thing… it wouldn’t be
success if there weren’t haters to tag along haha
i followed the build log and that shit is so clean……for real man that
shit is dope!!!!!!!!!!!!!
Haha Yes Meade!
yo steve! i want an SMD so bad! just watching this vids makes me want them
more! lol there sooo much money tho
Steve, you have inspired me to try and build a bad ass system in my 2012
Scoin tC, and to have some trunk space! I love your videos, I stay up all
day n’ night watching them trying to learn! Love ya man, keep up the sick
work!! SMD for life!!
if its not nominal bridgeable then you need a symmetric audio signal. you
connect the noninverted signal to the left channel and the inverted to the
right and you simply connect the speaker on both positive terminals of the
channels
the lexis has nitro’s oxide system awsome sweet sounding subwoofer in that
box 🙂 🙂
didn’t cut the frame
???
thanks man i appreciate that
whats the height width depth of that box
“lets see if this box is ready. Psyph put your face in it real quick…..”
i can reach an spl of about 110db on 75 watts by simply using a speaker
that has high sensitivity(no car audio does, another reason you HAVE to
pump thousands of watts) and a box large enough to properly accentuate my
desired frequencies. all your box is doing is separating the back wave from
the front, and accentuating some frequencies VERY slightly. with a small
box, it is impossible to get high spl’s without massive power. in a large
box it is easy to get high spl’s with low power.
commitment..indeed.
@meade to noonlinninja – Haha get em steve. Fuck that hater.
do none of you people realize that you can get equal and better performance
from your subs, if instead of using a tiny box you actually use a real box
with some actual space inside of it? seriously, the reason you have to pump
thousands of watts into car audio is this one reason alone. you can power a
speaker from your head unit and have it sound better then the next guys
10,000 watt piece of air moving shit.
those woofers a madd :p
0:55 NOS ! 😀