could be done by beginner mechanic in less then 2 hours… tools that you need: 14 mm socket, 17 mm key… optional : Break bar for stubborn bolts…. 😉
could be done by beginner mechanic in less then 2 hours… tools that you need: 14 mm socket, 17 mm key… optional : Break bar for stubborn bolts…. 😉
You must be logged in to post a comment.
Too much grease.
Plenty of meat on old pads.(no need to change)
You did not grease the faces of the pistons.
BUT…you will damage the pistons and seals by putting pressure on them at
an angle like that.
great video, just changed my front breaks but I don’t have the wire that
sits on top of the brake pads, Whats is that for?
Good videos, helped a lot, thanks.
thanks… please, watch my other video about IS300…