Go from your standard 3 button key to a Flip Key. Easy instructions on how to take the Flip Key apart and put back together. We sell aftermarket shells like …
Flip Key Instructions: 3 Button Lexus/Toyota Key to Aftermarket Flip Key Conversion
48
Like
Save
){kind=link}
- Tags:
Aftermarket, button, Conversion, flip, Instructions, Lexus/Toyota
- Categories: Lexus
Comments
Write a comment
You must be logged in to post a comment.
Dekkell
LOL
I did everything correctly (hopefully), and I got the folding key cut at a
dealer. But the problem is that the car starts, but then turns off after
like 2 secs. Help please! All of the buttons work, however.
Hello, where can I purchase one of the small lexus logo decals? Thanks
My 2002 lexus. Key shell broke and been searching for a new shell i really
like this one since the keys shown on the video are identical. I just wana
be sure that once i transfer my chip to the new key shell everything would
work.
if you lose the spring, is the key useless or can you get a replacement
spring somewhere. Please help
Couldn’t figure it out. The turn thing worked. Thanks!!!!
Thanks alot got my honda flip key back to working right
Excellent details …..keep it up sir.
A tip for cleaning out those stuck remote buttons… :
Once key or remote opened, take the circuit board out.
Clean the rubber housing where the buttons make contact.. (I use alcohol).
Then clean the little push buttons on the board.
Then drop a small drop of “Mystery Oil” (or other but Mystery works best
for me) lubricant on each button.
Then press each buttons (I use a mini screw driver) a lot of times as you
will see all the dark grunt, dirt and grease come out from them. (This is
what makes them get stuck and not work properly)
Continue until all dark stuff comes out and u start hearing a nice click
every time u push each button. (This means they are unstuck)
Clean access lubricant and re-assemble back.
Enjoy!
Thank you old man for your wisdom!
Your welcome! Glad it helped!
Sorry, not at this time. But check back, often as we get new items in
frequently!
Yeah, That would be great!!
Can you still use old key to open doors or start car if needed or does it
need key and module in same case to work?
The Key and Module must be in the same case to start the car. The
transponder chip is in the module and that is what the car communicates to
start your car. If you want to save the old key, even with a broken shell
you can use it to open the door lock, but it can’t start your car. Hope
this answers your question.
Why not sell a Key shell that allows using the existing broken key? i.e.
take the existing key blade of the existing broken shell and attach to the
new key shell. That saves the trouble of key cutting.
Very helpful, I was having a hard time loading the spring and then I saw
this video and got it..THANKS !!!!!!
Do you have something similar to this for a 2013 Ford Focus S? I have the
4-button key with lock, unlock, alarm, and trunk. Thanks!