Timing Marks and Timing Chain Installation On A Range Rover and Land Rover 5.0L Engine

Timing Marks and Timing Chain Installation On A Range Rover and Land Rover 5.0L Engine

in this video I will share you how to set up the Timing Chains on a Range Rover with a 5.0L Engine #TimingChains #TimingChainReplacement #TimingChainSetup
This job was done to this engine because the engine was making a loud clicking noise at idle, after diagnosis we confirmed that the timing chains were worn out,
the vehicle has 168.000 miles!!! Enjoy!!

36,937
Like
Save


Comments

Kevin Smith says:

Anyone recommend a place to buy the timing chain

njoeandjen says:

2011 with the 5.0 cranks no start timing chain ?? looking to buy great deal 110 thousand miles great price $1300 is it worth it thanks!

Ed LaBarge says:

time 15:35 in the video you spin the engine to check the marks line up again. How many times did you have to spin the engine? 19 teeth on the crank sprocket and 140 teeth on the chain. It takes 140 revolutions of the crank for the timing marks on the chain to line back up again.

matthew carpenter says:

I’m doing one now and keeping my fingers crossed that it didn’t bend a valve when it jumped time. Very helpful!

Thi lengy2 says:

Did you take off the radiator?

Rodney Insco says:

Where did you buy your tool kit you used?

j says:

Question: I have 2017 range rover sport 3.0. When I cold start. It warms up. But sometimes it Revs up to 3.5k or 3k. Like it isn't warm enough after the initial warm-up. Today I bought some mass air flow sensors. Hopefully that will work. A mechanic said that mines doesn't have a air injection pump. So it isn't that

j says:

Do you have to change the aculator?

ryan orr says:

Aj133 engine?

Victor Daniel Vigoya says:

Very good video.

Long Trow says:

I like to no bot

Marie C Gelin says:

How much did that cost and what are the labor hours for that job

Albert Bach says:

looks like a ford triton

Tzar Omega says:

What was the labor time on this job

Erano Lopez says:

Hi.. just want to ask how many rotation the engine need to line up the timing marks after you replaced the timing chain and tensioner to re- check your timing? Or i don’t have to a-line up it again?

AnyVisionFilms says:

Where are you located I need you to fix my range.

Leanna Amulet Msonthi says:

Full% awesome explanation .level up

Pete Pull says:

hi how are you> i was wondering if there is anyway you could tell me where to find the part number on the camshafts. i think i might of swapped the intake and exhaust by accident . Thank you

Ngwato Hendrick says:

I don't have spark on November one and four and three on right hend side the coil packs are good can eny one help me on range rover 2013 5.00

Randy Jairamsingh says:

when you say smoothly, you still feel the compression at each stroke?

thanks!

Mohammad Al-Gebaly says:

Awesome , very good and accurate job , timing chain needs a professional technician , here you are the one . Thanks

Comments are disabled for this post.