http://www.paddockspares.com/catalogsearch/result/?q=%22track+rod+end%22&parts_only_search=334&vehicle=0 Grease nipple still available on track rod ends? the…
Land Rover steering maintenance – track rod ends.
38
Like
Save
){kind=link}
- Tags:
ends, Land, Maintenance, Rover, steering, Track
- Categories: Land Rover
Comments
Write a comment
You must be logged in to post a comment.
The track rod end is universal. Either fitted to a steeering box drop arm
or to the steering arm on the the swivel housing it is the same.
Hi, Wondering if you have made a video showing the install of the track rod
to the swivel pin housing. Is there a special technique in fitting them.
Thank you
very educational video THANK YOU FELLAS
100% agree on the paddocks track rods … not normally a fan of the cheaper
kit but on those they’ve done a good job … can’t beat grease-able in
every aspect of life … with our Landy’s that is 😀
Brilliant! Favourite part was where you demonstrated removal using the
hammer as an anvil. Great to see before doing it. Cheers, Clint
All these videos, roverporn! thanks for putting these videos up!
Roverporn… good way of putting it! Thanks
Hi, I have added a link to Paddock website underneath the video.
There is a plastic bung on top of the thermostat housing which is the
bleed. Good suggestion. Will do that for sure along with cooling system
maintenance.
I know this is off topic though have you made a video on how to fill a TDI
engine with coolant avoiding air pockets?
Excellent..very well put together ..a credit to your profession. Thanks for
taking the time to help others.
Cheers, the bigger the track rod end the bigger the hammer!
I cant find your web site do you sell parts ? thank you