#Landrover #LandroverDiscovery #LR3
Replacing the front differential pinion seal. Would you think that a Land Rover authorized deal does this for you or not? Find out in this video. Enjoy the video and thanks for watching.
Vera & Christian
#Landrover #LandroverDiscovery #LR3
Replacing the front differential pinion seal. Would you think that a Land Rover authorized deal does this for you or not? Find out in this video. Enjoy the video and thanks for watching.
Vera & Christian
Comments are disabled for this post.
Get a Nissan Patrol you will spend more time 4wheeling than repairing lol. Just trolling here.
Hey Christian, what are your thoughts about lubricating your bolts with copper grease but still using the original torque setting from the manual that may base on a dry bolt? I came across this issue very recently and the change in the friction factor is significant.
This is great! I hope you will make some of your tools available to rent.
Great video – thanks for making it. On the diff oil level and the 610ml – as you found when you undid the pinion seal and the oil ran out – you never get all the oil out. As a result the amount to put in, in technical sense when taking the oil already in the diff could be 590ml, 630ml who knows. 10 years ago when I did my first diff oil change I put in 610ml and guess what – it was at the bottom of the hole – so 10 years later and 200,000km later with oil changes every 24,000km I just fill to the bottom of the hole. No issues. Same applies with the transfer case and rear diff. Easier and simpler to just fill to the bottom of the hole – there is only a few ml in it either way.
You sound like Herr Flick, brilliant.
I can smell it from here hahahaha
Keep hold of you home made pinion seal fitting tool because if you haven't unblocked the breather pipe then you'll be needing it again very shortly
Another great video. with all these one off, specialised tools you are making, it won't be long before you have opened your own Dealership!! Christian getting all the backache, Vera looking pretty passing spanners.
Wieder ein sehr interessantes Video, danke vielmals ! Habt ihr auch etwas mit der Beluftung gemacht ?