Get the products used in this video and support PMM by shopping through our store: http://astore.amazon.com/mctr-20make your own cold air intake for around $60 instead of paying around $300…
Get the products used in this video and support PMM by shopping through our store: http://astore.amazon.com/mctr-20make your own cold air intake for around $60 instead of paying around $300…
You must be logged in to post a comment.
){kind=link}
what state are yall in looks like a lot of fun, looks like NC
What is the best material for the piping not to heat up because of the
engine’s heat? Aluminum, PVC, plastic or rubber hose?
You loose hp from changing things that are stock unless u get a ecu retune
it would be rare cases when you see gains
Hahaha i think anyone that actually enjoys working on vehicles is a moron
and forgets glasses.. Who needs the fucking things anyway? LOL Good vid!
+JobeMinacum it won’t hurt hp if you have a turbo car. in fact i’ve NEVER
seen an instance of where reducing restriction hurts hp. saying that is
plain rediculous. maybe it’ll hurt torque by half a pound but who cares if
the car breathes better up top.
+Andrew Tackett just get some 2.5-3″ aluminum tubing and couplers. you just
have to think where you can route the tubing and how much you’d need/bends
etc.
how about all those hoses and shit that come off the factory air box. at
least my 92 ranger has a couple
How hard would it be to make a custom cold air take for an 84 Corolla LE
Automatic? Also where is a good place to pick up everything (besides the
air filter)? What kind of tubing is best? and etc. Sorry im not a mechanic
but wanna make my own intake system.
So you’re saying that putting a cone filter on a car won’t ever lower it’s
hp? LOL.
Love the tail lights on that s chassis just need to get the s13 Silvia head
lights on
10:31… that’s what she said. 😉
i will probably sounds better, im not sure about a HP increase though, it
certainly wont hurt or lower HP though
I like this. Ideo
no issues or check engine light at all, its a great mod
You’re looking at a 2 hp gain
u guys are car gods
HHHAAAA I asked so many people that same 80mph question at school!!! haha.
That vid was hilarious!
Great Video! you guyz are an inspiration! when is the exhaust pt2 vid
coming out?
good job,,,who is the size tube bro
The car would need to compensate, since from the looks of the intake, it
runs on an MAF, instead of a MAP, which the computer would run more fuel
into the chamber, thus using more fuel. Just saying.
Good info! Doing this to my 97 accod this weekend! Thanks for sharing!
I wanna say yes, or atleast the 94-97 do if I remember right, behind the
bumper on the passenger side, easy way to find it, is to pull out the air
filter box and the plastic circle going to the bottom of the filter box is
the top of the silencer box.
Silencers, suck ass, every 88-00 honda civic has one behind the front
bumper thats held in by a few bolts and you can keep the factory air box
and get 60-80% of the gains you get from an intake
Ohh ight thnx bro
yes we did goto 13:00
Woooow!!!! You are a god at making these things look soo easy to make. you
saved me about $200. Thanks Bro.
what can u recommend about carb engines intake filter?
You might as well buy one on eBay they have one for pretty much any car for
40$-70$
Yes
thanks so much! inspiration is our main goal! and pt2 will be our next
week, its a a full exhaust install, headers, x pipe, cut outs and muffler
its something???
your computer will process the info from the added air then add more fuel
and you get more power
Actually many of these intakes take in warmer air, causing a drop in
horsepower. Warmer air will get you more MPG but less horsepower, and
colder air will get less MPG but more horsepower. A short ram will more
than likely give you better MPG but less horsepower. But this set up would
work for slightly more HP. Just not much.
AWWWWWWWWWWW came off…… LOL
So… what kind of car do you drive, Mr. high-and-mighty? Probably a
Hyundai Accent or some shit… Come on man. People do things to their car
that they like to do. Thats why there is such a wide range of mods to do!
That way you can pick and choose what you want. Next time, instead of
bitching, maybe ask for some advice on how to sell your Hyundai?
Hey YouTube! Check out my channel!
I got a 2002 mazda 626. My transmission is down where you guys ran the
filter, and my stock filter runs out infront of my battery. Would I see any
hp improvements if I got an after market filter or would it only make it
sound better?
intakes have been dyno proven on these cars with out tune and many other
cars….dumbass
Intakes dont do much at all, they just look and sound good. On turbo cars
cold vs short ram doesnt make a difference cuz the intercooler cools it
anyway
U never started it>:(
Can i do this on my 1997 Pontiac Grand Prix GTP?
I like it but I feel like your car is extremely vulnerable.my buddys d16z6.
Boehm cuz water eventually made its way in the engine a literal hole the
size of my fist blew through the engine block. Keep the cold sure intake
in. the engine bay
what?
Eyy poor mann ?? I got uh nissan sentra too except its not the type R would
i get the same results if i get an type r intake to itt ??
editing bro!
Funny thing is I was just thinking about how to make a cold air intake the
other day and bam juat so happens to be on my favorite car mod channel!!
Also I almost forgot!!!. Where can I buy the tubing? I know I could get the
Brackets and rubber Parts at PepBoys or Autozone. But I’m trying to do this
on a 1999 Dodge Neon 2.0L SOHC.
PLEASE clean the car before you make a video jajaja, but good projec!
well yeah if you forget to plug in your maf sensor back in
wow, so glad i found your channel! I have a 2009 corolla L and wanna do
this. Would PVC work instead of that metal piping?