Friend of mine asked me to inspect her 2013 Kia Sorento for a clunking noise coming from the front end. After a quick test drive to verify the noise, I inspected the sway bar links. I found a rubber boot on one of the links on the drivers side was in poor condition. Water can get in under this boot and cause premature wear to the end of the link, causing a clunking noise in your front end. This video shows you how to remove and replace worn sway bar links.
Thanks for watching!
Joe
){kind=link}
Great video! Took only a few mins per side with the pry bar trick! Two different part numbers for right and left side. Also wanted to add it not only got rid of the small clunking noise on one side, it noticeably improved ride quality overall.
Nice video. Very detailed. You make it look easy for anyone can do.
thank you for this wonderful video…
Good video! Had all 4 stabalizers changed on my 2010 2.2l diesel kia sorento, plus the lower control arm due to similar banging noises. Thanks for the video on how these parts actually work.
If you jack up the entire front you won't need the pry bar
Both links are the same left and right