Buy Now!
New Starter from 1AAuto.com http://1aau.to/ia/1AEST00455
The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start. This video shows you how to install a new starter on your 1984-2001 Jeep Cherokee.
• Check here for more videos on the 1983-2001 Jeep Cherokee XJ http://www.youtube.com/playlist?list=PLJVpHWuCEUX_JPpl2fdzfdLsS6VJO5yvC
This process should be similar on the following vehicles:
1984 Jeep Cherokee
1985 Jeep Cherokee
1986 Jeep Cherokee
1987 Jeep Cherokee
1988 Jeep Cherokee
1989 Jeep Cherokee
1990 Jeep Cherokee
1991 Jeep Cherokee
1992 Jeep Cherokee
1993 Jeep Cherokee
1994 Jeep Cherokee
1995 Jeep Cherokee
1996 Jeep Cherokee
1997 Jeep Cherokee
1998 Jeep Cherokee
1999 Jeep Cherokee
2000 Jeep Cherokee
2001 Jeep Cherokee
Tools you will need:
• 13mm Socket http://1aau.to/oa/1AXAA00015
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 15mm Socket http://1aau.to/oa/1AXAA00015
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• 1/2 Inch Wrench http://1aau.to/oa/1AXAA00011
• Floor Jack http://1aau.to/oa/1AXAA00068
• Jack Stands http://1aau.to/oa/1AXAA00065
• Wheel Chocks
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Jeep Cherokee 2nd Generation 1984-2001: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_JPpl2fdzfdLsS6VJO5yvC
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
And no crappie music. Love this ! ! !
Couldnt you just completely disconnect the battery to avoid arc flashes
I can't see how you did the red tab and I can't figure it out.
Just saved time and $126. Thanks
Can you show me where to get these tools your using, the battery brush and that first one you used the take off the nuts?
what is the total time to replace this? thx
I'm guessing this is the 4.0L 6-cylinder, as the V8 is INCREDIBLY more difficult and far less access than on this video
Thank you for this video, about to replace my own.
Thanks a lot for your video ..
You Rock! Thank you!
Thank you. Sadly I an slowly becoming the man I want to marry,
What kind of wrench are you using?
This really helped me replace the starter on my wife's 2001 Cherokee today. 1/2 hour start to finish. I am now her hero, but the mechanic in the video is the real hero.
No macho BS video, Awesome to the point and inspired me to get the job done Now, Not as smooth as the author but a lot more informed to complete the project,,, Thanks!!!
Replacing my battery now so now is time to replace my old starter
Looked at a number of similar videos but this was the only one that explained the locking tab. Great detailed video. Thank you.
Thank you for this video. I watched it again and again, and was able to remove the old one and replace it with a new starter without issue.
Easy enough, thanks for the great video. Would have been easier without satans socket driver but i made do.
Fantastic video! Needs more clarity on removing that electrical with the red tab though! Had a bitch of a time figuring that out.
VERY GOOD VIDEO. TY
Great job on the video. I had to remove the oil filter to get access to the ignition connector. Somebody had installed a longer filter than spec. And I haven't degreased so it's a bit harder to see everything on mine!
How tf am I supposed to know if a video is quality without the dislike counter? Wtf???
If you don’t have one of those censored wrenches what should you do?
You made everything very clear, thank you.
This video helped me change out my starter today! Success, starts every try now. Thank you for the informative instructions, very helpful
Love it. Clear and to the point.