Car Fix DIY Videos

Buy Now!
New O2 Oxygen Sensor from 1AAuto.com http://1aau.to/if/1AEOS00237

This video shows you how to install a new left downstream oxygen sensor from TRQ on your 2008-2012 Jeep Liberty. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.

Estimated installation time for a professional technician is approximately: 24 minutes

This repair was done on a 2010 Jeep Liberty Sport 3.7L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2008 Jeep Liberty
2009 Jeep Liberty
2010 Jeep Liberty
2011 Jeep Liberty
2012 Jeep Liberty

Tools you will need:
• 22mm Wrench
• O2 Sensor Socket
• Ratchet http://1aau.to/ocpn/1AXAA00016
• Gloves http://1aau.to/obyh/1AXSS00048
• Safety Glasses

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.