Thanks to the awesome engineers over at Jeep, removing the doors on a Jeep JL Wrangler or JT Gladiator pickup truck is easier than ever before. And because of it, there really is no reason why you shouldn’t be taking yours off, especially now that summer is here! Well, except for the fact that they do take up a lot of space, get in the way and leaving them on the ground or resting up against a wall, can lead to them getting damage. So, what do you do with your doors once they are off?
For me, the answer was to hang them. Specifically, up on a wall so that I could get them off the ground and out of the way. And, while there are a myriad of door hangers out there that you can buy, most cost upwards of $100 or more. Needless to say, I decided to make my own and in this short video, I’ll so you just how easy it is to make, in less than half an hour and with just a basic set of tools. Of course, the best part about my DIY solution, is that you can find everything that you need at your local Lowe’s Hardware Store or the like and it can all be had for about $16 and change! And that, is what the PIPPI Project is all about.
For detailed instructions and a complete list of all the hardware and tools you’ll need for this project, simply click on the link below:
https://www.wayalife.com/threads/video-diy-door-hanger-easy-to-make-and-all-for-about-16.61809/
Come join our online community at https://WAYALIFE.com
RECOMMENDED BUYS
Milwaukee M18 Drill: https://amzn.to/3gyMeBE
Milwaukee Drill Bit Set: https://amzn.to/3wo3oIZ
Tekton Socket Set: https://amzn.to/3pPUMZp
Tekton Screwdriver Set: https://amzn.to/3wpnPWa
Milwaukee Tape Measure: https://amzn.to/3wrsmHG
Stud Finder: https://amzn.to/35iw6is
* Please note that the Amazon links posted are associate links and WAYALIFE does earn a small kickback for purchases made through them.
#wayalife #jeep #doorhanger #wrangler #jeepwrangler #jlwrangler #wranglerjl #jeepjl #jljeep #pippi #pippiproject #diy #budget #homemade #loweshomeimprovement
){kind=link}
Any tips for lifting doors to place on the hangars from an old guy
Can you show me for the roof put in the roof
Eddie I just designed a 3D printed bushing for the eye bolts, check it out here –> https://www.thingiverse.com/thing:5416199
Finally a simple door hanger! I was trying to come up with a budget way of making hangers for my LJ and when I saw the eye bolts, I was like well why didn’t I think of that!?! Genius sir, simply genius. Thank you brother!
Is this still working good for you
Awesome video. Thank you.
Lot of weight I thought
Only in America – i thought it was a joke that you're allowed to remove the doors from your car. Apparently I was wrong though; I never realised anyone would ignore crash safety by removing such an important part of the car's structure. Oh well.
Badd A$$, I love it. thank you what a fantastic idea.
Great video.
Lmao he did all that to hang the doors then pulled in with doors on.
So refreshing to see people building what they need instead of buying it. Great stuff!
Any reason you can't use a 4×4 with a longer lag bolt, or even counter sink it half way in? I have some scrap 4×4 I could use. Seems like that would work, am I missing something that would make a 4×4 not work out for some reason?
just did mine x2 for the rear. great idea and cheap
I cant get it through my head that this will be sturdy enough for the weight of the front doors, but obviously I am wrong
Built this today and it works perfectly. Thank you so much for this great video!
Love the video! but where are there doors on the wall AND on your Jeep??!!?