My fob still turns on the car and unlocks when using the door sensor but the unlock, lock, trunk, and alarm are no longer working after replacing battery on your key fob. (car still unlocks by door sensor and still turns on) here is how to fix it with out going to the dealer. you have to sync the remote to you car make sure you hold your key with the the logo up and you are going to hold the lock button while pressing the start button but make sure your foot is not on the brake do not turn your car on completely all your going to do is press the push start NO BRAKES.
im lost right now i got a g37 and the key doesn’t do anything i’ve tried doing this trick and it doesn’t work only way to start the car is by putting it in the slot pretty sure it’s because it’s an aftermarket key but it was once working perfectly fine
So my push start doesnt work, and its turned on in the settings. How can I fix that
What battery did u use
thank you so much
Worked just as described – only explain that you need to push the Start button on the car 3 times as you are holding the lock button down.
Unfortunately this doesn’t work for QX80
My key completely died for my infiniti G35. It’s a 2008, think if I replace the battery’s and do this it will work again?
you saved another soul today!! I was struggling with FX35 FOB after switching the battery and came across your video. Thanks a lot!
This definitely worked for infinity jx 35
Appreciate it bro worked on my Chrysler 300 2007