My Infiniti G35 has the oil Consumption Problem Even After Catch Can installed.
Infiniti G35 oil Consumption Problem Even After Catch Can Installed
2
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
My Infiniti G35 has the oil Consumption Problem Even After Catch Can installed.
You must be logged in to post a comment.
Well my g35 is finally fixed..i ended up getting new piston rings, both
heads were rebuilt and new water pump and throw out bearing since it was
kinda bad already…the whole job with parts and labor came to a total of
$1000 wich was amazing. Compared to what any common shop would had charge
me. Anyway no more smoke!!!
Im having the same problem. I need information how to fix it?
before paying alot for a shop tp fix it, change your PCV valve, if that
dosnt fix it, your head gasket has failed, mine was due to wrong coolant
being used for a long time in my Mercedes Benz 300ce, Your compression is
unevenly low, that suggests a cracked head or failing piston rings, most
likely if your intake hose’s are clean then its the head gasket
Hello, I have been doing research on oil consumption in our cars. Your
issue is different than others and mine as well. Yours occurs at startup.
The catch can is to resolve a poor design in the PCV system sucking oil up
into the intake manifold. The issue you are having is due to worn valve
guides. A catch can is not a fix for your situation. You will need to have
the valve guides replaced. I almost guarantee valve guides are your
problem. If it were piston rings you would blow smoke ALLL the time not
just at startup. Hope this helps. Good Luck