Buy Now!
New Engine Water Pump from 1AAuto.com https://trq.video/ib-1AEWP00175
This video shows you how to install a TRQ water pump in your 2003-2007 Infiniti G35. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This repair was done on a 2005 INFINITI G35 X 3.5L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2003 INFINITI G35
2004 INFINITI G35
2005 INFINITI G35
2006 INFINITI G35
2007 INFINITI G35
Tools you will need:
• Flat Blade Screwdriver https://trq.video/obpT-1AXAA00013
• Phillips Head Screwdriver https://trq.video/obpT-1AXAA00013
• 12mm Socket https://trq.video/obDa-1AXAA00015
• 13mm Socket https://trq.video/obDa-1AXAA00015
• 14mm Socket https://trq.video/obDa-1AXAA00015
• Pliers
• 1/4 Inch Ratchet https://trq.video/obij-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/obDa-1AXAA00015
• Torque Wrench https://trq.video/oaLn-1AXAA00044
• Safety Glasses
• Drain Pan
• Floor Jack https://trq.video/oaaL-1AXAA00068
• Jack Stands https://trq.video/oXS-1AXAA00065
• Pick https://trq.video/oR8-1AXAA00037
• Razor Blade / Gasket Scraper
• Vise
• Wheel Chocks
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Infiniti G35 3rd Generation 2003-07: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9INHZnLSy7u_jNSfqFBkNh
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Quick responses please. What size bolt and length etc to get water pump out? 05 g35 sedan auto. Im working on is a 10mm bolt to loosen but which bolt used to pop out water pump? In the video u said u use 13mm socket. But give the specs please.
You’re A Legend Man. Thank you
Think i have found how to set tdc the marking is on the water pump cover lin that up with the line on the crank ( 3 lines on crank you want to line the 3 line up with marking in water oump cover)
Can someone explain how to determinf when its top dead center
Life can't get better than this ,you did a wonder job i wish we get more people like you .Thank you.
He's doing too much.
This older generation of engineers is much more inteligent built compared to the newer ones. Exactly water pump has an access door ! God bless!!!
Good video
Brother, I have a 2007 Infiniti G35 sedan. It is leaking water, it comes from above. I fell to the side where the compressor is and it goes down to the oil pan. Could it be the water pump?
I really wish you would have mentioned what kind of bolt size was needed to remove the water pump to push it out because you make it assume like it's the same size as the ones used to hold the water pump into place which is not! Is actually a size bigger. And now I have a broken bolt in there and already broke several taps and have metal Shavings in engine just because it.
Need to do my water pump today. Need to go get some magnetic socket, what size bolts is there 10 and 12?
How close is this to a m35
how tf do you do this without messing up the time?
Will this also work on a 2005 FX35? Thanks
I recently changed my tensioner using this basic method and now my car runs really sluggish im worried i somehow got it out of time……. probably important for people to be aware of while doing this
Wow, this is deep! I am going to really watch this about 4x, so get the confidence or just wait and spend the money with mechanic doing the timing chain get it done. Great video!
Screw size ?
I would have gotten stuck rt when the waterpump didnt just come out once the screws were removed,and so then I would have tried to pry it out and screw something else up…hahaaa so thanks for doing this man….
I was bleeding out the air in my coolant sytem after refilling it from a thermostat replacement. I kept getting air in there,whenever i stop it would blow cold once i hit the gas the heat came back so i got a no spill funnells and let it run while the bubbles would come out,i was watching the game real quick while waiting for my baby to purge that air,I Fell Asleep man…woke up the next day!!!! Went out to walk my dog the next morning7am and noticed the car had been running with funnell all connected for a long while,it was on at 6pm Sun and shut it off 7am Mon….hahaha
It was running beautiful after..haha im in a high crime area and was amazed that no one touched it..people steal hubcaps around here,thats how bad it is around here..all the windows down no lights on,they couldve had a fun time but god was watching my sht…
how do you put the car at top dead center ?
Best video I have seen on the topic. All the other videos just start with the parts removed..
At 8:17 min you say pull back on the crank. Does that mean rotate the crank counter clockwise a little?
Looking for a guide like this for a 2007 Nissan murano
How identical is it to the infinit g37?
I followed these directions perfectly and even started the job with the engine in tdc. For whatever reason no matter what I do, I can't get enough slack on the timing chain to remove the old water pump.
How did you take that out with those bolts I did that too an its still stuck what did u do cuz I know that ainy helping it push out . Do u gotta smack it with a hammer for it to free up??? I'm doin this now
By far the best auto mechanic channel.
Where r u located, bro? i need u to work on my g35.