How to replace Inner & Outer Tie Rods: MOOG brand Infiniti g35 nissan 350z

How to replace Inner & Outer Tie Rods: MOOG brand Infiniti g35 nissan 350z

Left tie Rod MOOG ES80579 Tie Rod End
https://amzn.to/3sGDS27

Right tie Rod MOOG ES80578 Tie Rod End
https://amzn.to/3HOcq6R

Moog inner tie rod end
https://amzn.to/3INrV0c

I am an amazon affiliate, so purchasing through the links I provide supports the channel with a small commission. The price is the same for you.

This video shows how to replace inner and outer tie rods, and how to align the car by sight afterwards (you will need to take it in for an alignment though).

This is shown on a 2006 Infiniti G35, but the process is the same on most vehicles.

This is the same on the 350Z and G35 coupe as well.

Moog tie rods

37,518
Like
Save


Comments

Qbleezy24 says:

I bought some ac delco tie rods and they didnt come with a castle nut, just a regular thick nut.. Does that matter…

Estevan R says:

Are the outer tie rods the same on both sides?

Marvin Nerio says:

Should this procedure be the same working on a 2007 or 08 g35 sedan ?

Luis Perez says:

Always some of the most educational videos. Especially because i drive New Edge Mustangs and VQs as well hahaha

Slowered G35 says:

Did you fill the outer tie rod with grease or they come with grease inside already?

Muhammad Suhaib Nazar says:

VERY good video! Thanks!

hamdan alm says:

how much does this inner tie rod cost?

JJ Amaya says:

While spinning the nut off, the inner tie rod kept spinning with the nut and I couldn’t keep it straight since its so rusty. Would the inner tie rod being spun a couple turns out from before affect anything?? So far the test drive after installing the Outer tie rods went great and feels so much better than before.

Roy Khau says:

fantastic video, really helpful

JVNTRS says:

Dude you’re awesome for this video, thank you!

Ronnie Fisher says:

Great video man! I have a 2006 g35 with 100,800 miles on it and replaced the inner tie rod with your help from the video and I mushroomed the top threads hammering out the outer so just put in the new outer as well. Do you have to grease the outer after installing it?…

Gabriel Solis says:

Supper helpful .

- MrRichBiker says:

great job, and video. you have nice big hands, btw….oohhhhhh

hooligan says:

Are those moog rods holding up pretty good?

Fhel2xx says:

Do the coupe & the sedan have the same tie rods or no ?

Jorge Diaz says:

is the right inner tie rod the same as the left inner tie rod

Adnan Alsalitty says:

Fantastic great job buddy

Rigo Rodriguez says:

Is the moog brand reliable for the infinity g37?

Louie Lucena says:

Very helpful thank you

Comments are disabled for this post.