I have a quick question, after doing this did you have to bleed the brakes,
or just basically put the cap back on and pump it a few times then top it
off with fluid? I might be overthinking this but I just wanted to double
check
if the light is on there are 3 suggestions ill draw if one dont work try
the next. 1st try disconnecting the battery for 15 mins ,still on get an
obd 2 code reader to check the codes have them erased ( it would come off )
if it returns have the codes checked again theres a normal suspect that
does this in those years of Nissan/Infiniti vehicles and thats the
emissions systems but as long as the O2 sensors are fine the car is ok but
the light would be on.
Do you have a video for back brakes? There is a Cable that my 1999 infiniti
G20 has and I can’t for the life of me figure out how to get it off. Thanks.
@Human6billion i dont care what anyone tells you (unless they specialize in
Nissan cars) nothings wrong with ur motor the SR20 is one of the best
motors ever made by Nissan ,Vibration could come from warped rotors esp
when u apply the brakes you can feel the brake pedal ,unbalanced wheels
,bad tires so there many varaibles if u need more help hit up the forum
SR20-forum com
I have a 2000 g20 bought a few months ago. It runs good but has a vibration
when I drive, could that be caused by bad brakes and rotors? I know I need
brakes because it does squeal a bit. I have been told vibrations could be a
torque converter or some type of balancers for the twin cams, I dont’ know.
Any infor would be appreciated.
When I change the pads do I need to change the front rotors as well. My
2000 G20 has around 165000 miles. Bought from a dealer as a tradein. Trying
to fix it up. Thanks to your previous information I found out my motor
mounts were worn out. Good info on your videos. Thanks.
You might want to put on a new pair of clean gloves before handling the
newrotor and brakes or you’ll be kicking yourself later. That or use a can
or two of non-chlorinated brake cleaner amd clean the heck out of those
rotors after you install them.
I have a quick question, after doing this did you have to bleed the brakes,
or just basically put the cap back on and pump it a few times then top it
off with fluid? I might be overthinking this but I just wanted to double
check
Mine had similar problem. It was the engine mounts.
if the light is on there are 3 suggestions ill draw if one dont work try
the next. 1st try disconnecting the battery for 15 mins ,still on get an
obd 2 code reader to check the codes have them erased ( it would come off )
if it returns have the codes checked again theres a normal suspect that
does this in those years of Nissan/Infiniti vehicles and thats the
emissions systems but as long as the O2 sensors are fine the car is ok but
the light would be on.
Do you have a video for back brakes? There is a Cable that my 1999 infiniti
G20 has and I can’t for the life of me figure out how to get it off. Thanks.
Best video online!
@Human6billion i dont care what anyone tells you (unless they specialize in
Nissan cars) nothings wrong with ur motor the SR20 is one of the best
motors ever made by Nissan ,Vibration could come from warped rotors esp
when u apply the brakes you can feel the brake pedal ,unbalanced wheels
,bad tires so there many varaibles if u need more help hit up the forum
SR20-forum com
Thanks man it helped me a lot
great video man, helped me out a lot thank you
Thanks man, great video 🙂
I have a 2000 g20 bought a few months ago. It runs good but has a vibration
when I drive, could that be caused by bad brakes and rotors? I know I need
brakes because it does squeal a bit. I have been told vibrations could be a
torque converter or some type of balancers for the twin cams, I dont’ know.
Any infor would be appreciated.
@markd3z hahahaha TRUE !!! but hey i did the rotors too so that will just
take a few mins longer, BUT !!!! my 300ZX was the same as the Merc.
nice job. 🙂
When I change the pads do I need to change the front rotors as well. My
2000 G20 has around 165000 miles. Bought from a dealer as a tradein. Trying
to fix it up. Thanks to your previous information I found out my motor
mounts were worn out. Good info on your videos. Thanks.
are there any screws that secure the rotor to the hub?? like Hondas.
Great video thanks for putting this online.
glad to have found this video- my 99G20t is due for a change up on the
rotors AND the brakes- i can do it myself!!
Nice job .. not quite as simple as the Benzo
sup bro i have my check engine light on. On my infiniti G20 2000 And i have
replace all the parts bt the light is still on. PLS HELP
None
You might want to put on a new pair of clean gloves before handling the
newrotor and brakes or you’ll be kicking yourself later. That or use a can
or two of non-chlorinated brake cleaner amd clean the heck out of those
rotors after you install them.