350Z G35 BREMBO WHEEL SPACER You really dont have to buy BREMBO wheel spacers, all you would need to do; 1. Order regular infiniti g35 wheel spacers. 2. Get rid of (useless) bolts on your…
350Z G35 BREMBO WHEEL SPACER You really dont have to buy BREMBO wheel spacers, all you would need to do; 1. Order regular infiniti g35 wheel spacers. 2. Get rid of (useless) bolts on your…
You must be logged in to post a comment.
each spacer
Quite the mechanic….
what kind of tool did you use to get rid of the useless bolts? i have a G35
coupe with brembos breaks on and both of my rear have two useless bolts. i
really need to get it off. please help
for my 06 Z do i need to re install tpms?
@evolancer09 That only happens if you bought the wrong type size or
material.
What’s the first bolt you removed( it’s between the 5 studs? Cuz I tried to
put some wheels on but the bolt was in the way
yes i used 50mm spacers for the rear and 25mm/front
after you put the wheel back on was there any play between the wheel and
the spacer before you tightened the bolts back up?
@evolancer09 no,no wobbles.
Is there a specific wheel spacer i should order, i believe i need 20mm.I
have Brembos on my g35 too. also after installing spacers does the cars
drive-ability get affected?
no wobble’s feeling while driving ?
Wich set up is better to prevent vibration and other issues, this kind of
spacer or the one u have to replace the stock studs for longer ones and the
spacer
can you get these up to 2 inch thick i need atleast 2 inches in the rear
thanks
@psychomotif i had 25mm front, 50mm rear. it was fine.
did you have to cut your stock studs?
you had 50mm rear 25mm each or 50mm each spacer?
Did u noticed on 0.15 nothing is sticking out pay attention to the
video……
no
thank you!.stupid people at auto shop said it was specifically made for the
brembo brake kit and cannot be removed. so i had to modify my wheels by
drilling slits into the wheel. should of watched this first