http://autotechviewpoint.com/tipjar Timing Belt Replacement Hyundai Sonata 2005 2.7l DOHC 6cyl water pump Install Remove Replace. This is part 1 for timing b…
Timing Belt Replacement Hyundai Sonata 2005 2.7l PART 1 6cyl water pump Install Remove Replace
21
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
seria genial si estuviera en español 🙂
Only thing I can think of is getting a more powerful gun, or getting a proper holding tool for the cam gear, so you can hold it while you try to break loose the bolt. Look on Amazon for a cam pulley holding tool to see what options are out there.
i have the same car, i was trying to take the camshaft pulley, i remove the bolt with a compressor, the pulley it would not coming out, i spray and spray, over and over and topping with a piece of 2×4 left to right any suggestions? Great video. Thanks.
Thank you for the great video! After watching your video I had a timing belt job on a 2003 Sonata with a 2.7 the next day. Thanks to your great instruction in your video I was able to complete the job in no time at all.
I had the same issue with my sp on cordless screwdriver. i took it apart an used a moly lube grease (packet from a set of brake pads ) on the planetary gears and it runs quiet again. Took 10 min, maybe this could help.
I believe I supported it and then took the engine mount bolts out, I do not think that the engine goes down that far.
Did you Jacked the Engine up?