Buy Now!
New Wheel Hub from 1AAuto.com https://trq.video/ia-1ASHF00179
New Wheel Hub Set from 1AAuto.com https://trq.video/ia-1ASHS00254
This video shows you how to install new front wheel hubs and bearings from TRQ on your 2011-2014 Hyundai Sonata.
This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• Flat Blade Screwdriver https://trq.video/obAC-1AXAA00013
• Pry Bar https://trq.video/o4T-1AXAA00020
• 18mm Wrench
• 10mm Socket https://trq.video/obxL-1AXAA00017
• 12mm Socket https://trq.video/obUA-1AXAA00015
• 17mm Socket https://trq.video/obUA-1AXAA00015
• 18mm Socket
• 19mm Socket
• 24mm Socket
• 32mm Socket https://trq.video/odC-1AAST00003
• Brake Caliper Hanger https://trq.video/omd-1AXAA00439
• Dead Blow Hammer
• Press
• Needle nose pliers https://trq.video/oHi-1AXAA00051
• Needle nose pliers https://trq.video/oHi-1AXAA00052
• Pliers
• Snap Ring Pliers
• Ratchet https://trq.video/obXy-1AXAA00016
• Torque Wrench https://trq.video/oa2o-1AXAA00044
• Bungee Cord
• Cotter Pin
• Gloves https://trq.video/oaLg-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oapA-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oabV-1AXAA00065
• Large Hammer
• Sledge Hammer
• Vise
• Wheel Chocks
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Hyundai Sonata 2011-14 6th Gen: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_4iB_GgpdTsu8hzlflb_DH
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
My bolts on my wheel broke off. Can I just replace the bolt or do I have to replace the whole wheel hub?
So how did you press the hub out? Kind of a major part you left out there.. I’m betting it was beaten out with a hammer because they’re a pain to jig up
My order of operations would have started by pulling the pads, then the caliper, but there's a reason I'm the dude watching, not the dude making the video. Does the order matter?
i like the how he his camera angles are very clear and visible, most importunely is his step by step start to finish process. thanks
This dude made it look easy… just have the tools n parts, do it on a Saturday morning
If I just want to replace the studs is it the same process?
You… Buy the knuckle complete. Good video.
Is the press a must in this process?