This video takes you through the steps of installing HID Lights into a Hyundai Tuscon it can be used for other models swell as most of them from 2010-UP have…
This video takes you through the steps of installing HID Lights into a Hyundai Tuscon it can be used for other models swell as most of them from 2010-UP have…
You must be logged in to post a comment.
){kind=link}
hello, I want to know how I can remove the headlights of tucson, thanks?
@Downeast1100 If you get them from my shop, ill replace it for free on the
spot it comes with a lifetime warranty on the bulbs
Sorry I would like to see my trailer hitch while driving?
Yay for uncontrolled light output!
1thuglife 2 pac sent me, he wants projector lamps.
Nice vid man! Just so u know its called a terminal relase tool, to remove
the pins from the connectors! Chooch it!
Unfortunately not 🙁
do you know how to dissemble the whole headlight without cracking the
retaining clip?
Do we always need a relay kit for this vehicule?
When using the relay pack, it only uses one side for the trigger for both
sides of the headlight. DRLs are fine.
Is your reley kit making in ANOYING noise?? mine is doing it… what is the
mark of your reley kit? thanks
1puglife sent me here.
Pug1 sent me!
1puglife sent me bro u got a quote on limo tint for a 82 caprice
good vid, pug sent me..But what do you do if a headlight blows?? can you
get these bulbs at an auto parts store or do u have to order them. The cops
wont wait 7 to 10 days for a headlight out. Just wondering.
i just want to add if your buying these. make sure your connections have
that yellow seal! (seen in the video) a lot of cheap ebay ones do not. salt
will get in there and eat away your contacts. which then you will have to
change the ballast, or entire kit. you get what you pay for. hey carphonix
big fan. we do this stuff as a hobby. next time I’m at pugs I’ve gotta stop
by and see your shop. your living a dream to me career wise haha.
well… what is your kit.. I bought a 35W 8000k h4 kit with relay and the
relay kit is making in anoying noise when my car is turned on. I just
checked some tricks how to fix it and the capacitor that I put in the relay
kit just exploded.
Hey fella Just checked you out after seeing you on pugs channel. I have a
2010 Tucson, is there a way to make my gps screen a DVD player? Also u
would live to see my trailer hitch while driving? Thanks
@thestuffz Cheap, call the store, 519-425-5005
What is the casing around the bulbs used for? I didnt removed mine because
I thought it would reflect light everywhere (blind people). Do you think
I’d better remove them?
can you post a vid on how to install fog lights on the tucson? That’s would
be sweet
pug1 sent me. i scribed to ya
whats a set for an 07 f150 run?
cool vid
PUG1 SENT ME !!!
IT’S HYUNDAI LIKE SUNDAY! FOR FRIGG SAKES
How much would something like that cost for a 97 grand prix
Thanks, just wondering, you heat shrink the white plug of passanger side
only? but the driver side you pass the square plug inside through the dust
cover to connect? So the kit has uneven number of wires of each side? (I
assume there is no square plug for the passenger side). Also I thin our car
use the same bulb for DRL, so any issue?
@ailll1 I generally remove them because the housing already has a reflector
in it, if you dont take it off you will have light all over the place, if
the factory bulbs dont have one, your HID shouldnt either. Hope that helps!
Yes if you want your high beams to work 🙂
i hope after every cut u cheeched, poligize.
@DudeNiceVCR no…
pug1 sent me to sign up to you
you should have done a vid on big dirty!
Thanks for hooking up Pug. Chooch it!