This is a quick video showing you the simplicity of our harnesses in this case for a 2018 Hyundai elentra. in this case the installation took us 5 hours most of that time was spend running the power wire through the fire wall.
www.lljcustoms.com
602-320-7004
Get yours HERE:
https://lljcustoms.com/store?olsPage=products%2Foem-loop-harnesses
){kind=link}
So this harness makes it where you don't have to splice the wires behind the radio and run to amp?
is this the same process on a 2019 elantra SEL
How much do they cost?
I want to know which is the connector where the cables of the reverse camera are ?
Hey so this makes it so your speakers can be through a amp right? I want a sub and my speakers need more power because the stock deck doesn’t really do it, it sounds good but not as good as it should
you didnt cover the process of hooking up the power wire or feeding it through the firewall and thats what i needed to know…
Saludos desde puerto rico quiero saber que hicistes para hacer esa rabisa
Will this work with a 2019 Tucson
Very Well Done!!
do you guys have something for the 2019 elantra?
Yeah I currently have a skar evl 12 and a skar Rp 1500.1 I got a passive lloc and tapped that Into the drivers rear speaker wires to power my amp. I want to replace the front speakers with component set and replace the back with some 3 way and put an amp on them. I know I need to get an audio control lc7i. With using your harness to loop the power from the amp through the original wire harness behind the radio would that not be bad since the wires are a smaller gauge than what would be needed. Also, if I don’t run new wires through the molex door plugs how would I hook up components in the front door?
Great harness! How is the back up camera retained? Is it with the USB harness?
Where did you ground the amp?
So This harness lets you put an amp into the stock system to add power to the existing speakers (and whatever additional speaker, subs you want to add)?
That wouldn’t wreck the stock speakers?
I have an elantra sport and I want to install a subwoofer so whats the difference between the pl7-2 and the pl7-2r ?
Are the wires identified at the amp end?