http://www.robertscustoms.com/ http://www.stewardsproductions.com/ Torque specs for p/s pump: 2 bolts in top of pressure line – 8 ft lbs. 2 bolts that hold p…
http://www.robertscustoms.com/ http://www.stewardsproductions.com/ Torque specs for p/s pump: 2 bolts in top of pressure line – 8 ft lbs. 2 bolts that hold p…
You must be logged in to post a comment.
*ROBERT”! WTF is this crap .. I tell you what .. it’s a GREAT VIDEO bro ..
thanks very much!!! Awesome .. easy to follow, well thought out .. great
job! May I make a suggestion .. it would be nice if you can lay out the
tools required before the job .. other than that .. “U da Man!”
Do you have any videos of changing the power steering pump on a 2005 aveo5
Thank You.
Please heelpp meee. The deeler wants more than 1000 dollars to fix my
steering. I need to replace some parts too. That i know how to do it.
Please. Thanks
how do you drain all the powersteering fluid if you want to flush the
system?
Thanks
First, Thank you! I now believe I can replace this on my own. I filled the
steering fluid with a non Honda brand fluid and the next day the red cap
blew off while the vehicle was warming up. Fluid went everywhere and now
the cap won’t stay on. Just looking for an opinion. is it a cap problem or
a steering pump problem. This is a Honda odyssey 05 with a 172k. Thank you
Thanks for video, should be easy to do. One question? I been looking on
line at Auto parts stores. The picture of the item does not appear to have
the valve where the hose goes into. Can I use the old one? or are there any
seals in between that also need to be purchased or replaced?
Very detailed video. Thank you very much. I was able to fix this problem
with no problem.
Hi, did you have a light whine when pushing the gas pedal? Is that related
to the power steering noise? Thanks
Nice video. I just buy a 2007 touring, power steering is making noise,
honda said that the rack and pinion is fine and pump is fine, i need to
change reservoir , high presure line , pressure switch and flush all fluid.
The fluid is a mix of diferent types of fluid. Im thinking on doing it my
self. I allways work on my cars. But i never did this before, HOW DO I
FLUSH ALL THE FLUID FROM THE SYSTEM WITHOUT DAMAGING THE PUMP? AND, THE
PRESSURE SWITCK GOES ON THE PRESSURE LINE? THANKS IN ADVANCE. KEEP UP THE
GOOD WORK..THANKS …
How do I know it is my power steering pump not my rack and pinion if there
is no leaking visible ….
Do you have a similar video for a 2002 Odyssey? If not, how much different
would the procedure be on a 2002, like does it need to be accessed from
underneath the vehicle?
You are a man of many hats!
what was the torque numbers for the bolts, and did you use brake cleaner at
the end to clean the engine??
Mine seems weaker with towing the trailer also brakes, thinking of just
getting a truck though
I used a Snap-on 3/8 drive
Great video guys, very informative!
Awesome video. Thanks Robert
Tnx Bro.. for your video it gives me an idea to replace my p/s pump of my
2003 Odyssey good job!!!!!!
Sorry it took so long to get these up, but here they are. Torque specs for
p/s pump: 2 bolts in top of pressure line – 8 ft lbs. 2 bolts that hold p/s
pump to engine -17 ft lbs. P/s pump pulley -47 ft lbs
Your welcome
No problem Rick. Thanks for viewing
You can replace the pressure line only if its leaking. If you can send a
pic of your leak, I might be able to pinpoint it for you
Your welcome
What brand of cordless impacts did he use?
pretty help full, now i can save some money.therefore, Robert i seen my
pressure line is leak. can u help me out with it how can i replace that ?