How to Replace Upstream O2 Sensor 03-11 Honda Element

How to Replace Upstream O2 Sensor 03-11 Honda Element

Shop for New Auto Parts at

In the video, 1A Auto shows how to replace the upstream O2 sensor. The video is applicable to the 03, 04, 05, 06, 07, 08, 09, 10, 11 Honda Element

🔧 List of tools used:
• Flat Blade Screwdriver
• 10mm Socket
• O2 Sensor Socket
• Ratchet
• Socket Extensions
• Rust Penetrant
• Floor Jack
• Jack Stands

For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto
Do it Yourself
Save Money

T .H says:

“Let’s see if we can break it”. I can relate to that. Subscribed.

Flying Pass says:

Thank you! This made the replacement super easy and took care of it myself. Great video!

1sttobylopez says:

Time for a new bracket, so i received an 02 sensor code bank one. is that down stream or upstream?

Penguins Are my favorite dinosaur says:

I need to buy the upstream and downstream sensors for a 06 honda element. is there a difference? please help thanks

Tec says hi says:

I just did my 08 CRV yesterday. Unlike this video that looks fairly easy, the subframe is in the way. Despite that I used a crescent wrench with a pipe as leverage and the sensor came loose easily. I had no problem with the plug connector. I used a new denso sensor.

noleftturnunstoned says:

Who is the manufacturer of this O2 sensor? Thanks!

Will Sheehan says:

Is it the same for a CR-V?

Simeon Washington says:

Do I need the specific 22mm o2 sensor socket in order to remove the sensor?

Comments are disabled for this post.