I made mistake i broke retaining pin on emergency brakes… make sure that emergency brakes are off while removing rear rotors!!!! 1) remove the master cylin…
I made mistake i broke retaining pin on emergency brakes… make sure that emergency brakes are off while removing rear rotors!!!! 1) remove the master cylin…
You must be logged in to post a comment.
){kind=link}
5:55 when compressing the piston back into the caliper, use the old brake
pad and center the c-clamp over it… more even pressure on the whole
piston & not just on the edge
this video would be ok if he pointed out all his accidents AND put those
mistakes in the description so people know to look for them.
both brake pads and rotors replacement tutorial on honda pilot 05..
Great video but I think you overwork it a little too much, but I understand
new.set of rotors would look great, I will get those rotors too..
i know… and what? got another retaining pin on junker and installed
everything back on…. everybody making mistakes sometimes… We learn on
our mistakes….. Only those people who don’t do nothing themselves don’t
do any mistakes.. 😉
3:20 wawawiwa!!!!
That was an informative video but who in there right mind works on a car
with sandles on. SAFETY FIRST!
yes… be careful not to brake retaining pin.. like i did on the rear
emergency brakes..
yes you are wright… Safety is first… thank’s for the comment…
You broke the retaining pin on the emergency brake when you were taking off
the rotor and never mentioned it. Lousy video.
😉
what are u doing? That is how not to remove brake pads.
yes i know i broke retaining pin on emergency brakes… thanks for your
comment..
Thanks for the video! It was just what I needed.