Buy Now!
New Torque Strut Engine Mount from 1AAuto.com http://1aau.to/ia/1AEMT00150
1A Auto shows you how to remove, install, change or replace a broken, worn out, motor mount. This video is applicable to the 06, 07, 08, 09, 10, 11 Honda Civic.
🔧 List of tools used:
• 17mm Socket http://1aau.to/t4L/1AXAA00015
• 1/2 Inch Breaker Bar http://1aau.to/tfo/1AXAA00078
• Ratchet http://1aau.to/tWR/1AXAA00016
• Socket Extensions http://1aau.to/t4L/1AXAA00015
• Torque Wrench http://1aau.to/tmI/1AXAA00044
• Rust Penetrant
• Floor Jack http://1aau.to/tm4/1AXAA00068
• Hammer http://1aau.to/tgm/1AXAA00091
• Jack Stands http://1aau.to/tnj/1AXAA00065
For More Info visit us at http://1aau.to/h/aXh/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
What size are the bolts
So we don’t need nothing to hold the transmission?
Would this be the same for the hybrid model?
Literally just came home from the dealership, my torque rod has a slight bend and they’re wanting to charge me $320(part only) to replace it
So does this stop vibration at high speed?
What's not addressed is when the sleeve is totally frozen on the bolt and you tear the boot, free spin the sleeve, and snap off the nutzert at the top
“I’m just going to tap it with a ball peen hammer”. Proceeds to beat the &@%£ out of it. It worked!!
What symptoms was the car having that would indicate it needs to be replaced
I see you use regular ratchets and breaker bars. Would using a impact wrench be harmful?
You guys do amazing videos!! Keep up the good work. How can I order all the mounts for my 08 R18 DX-G with new bolts?
Thank u for the in depth tutorial! Did mine with little hassle. Beware that it was easier for me to take the mount out than it was putting the new one on. Compared to the video.
When you torqued the bolts down I didn't see you change the ft lbs setting on the torque wrench for the other bolt that was 69ft lbs?