In the video, 1A Auto shows how to replace a broken or loose door check. The video is applicable to the 08 Honda Civic.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/twi/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/twi/1AXAA00013
• 10mm Socket http://1aau.to/tSb/1AXAA00017
• 12mm Socket http://1aau.to/t8v/1AXAA00015
• Trim Tool Set http://1aau.to/thq/1AXXX00004
• Ratchet http://1aau.to/t2j/1AXAA00016
• Razor Blade / Gasket Scraper http://1aau.to/ta7/1AXAA00280
For More Info visit us at http://1aau.to/h/a54/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Hello, I have an issue with my honda civic 2011. I'm wondering what causes this. Basically when I open the passenger door, the door will stop on it's own mid way then if you push it more it will move all the way out. Now the driver side door doesnt stop midway it just opens all the way out. I wanna fix the driver side door what part could be the culprit?
thank you… graaaaaacias amigo, saludos desde México, suscribed!
Why can't you just take the speaker out to remove the part.
Thank you! A 2006 Civic has one added phillips-head screw behind arm rest. I propped the panel on a box, pulled top-right rubber plug and peeled back 1/3 of vapor barrier. All is good again!
do you have a video on removing the entire door/is it much more work than this?
Thank You !!!