http://www.1aauto.com/1A/ControlArmsFront/Honda/Odyssey/1ASLF00354 1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, …
http://www.1aauto.com/1A/ControlArmsFront/Honda/Odyssey/1ASLF00354 1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, …
You must be logged in to post a comment.
You shouldn’t have to.
You can purchase any jack locally or online through any tool dealer. They
range in price.
was that the oil filter i saw..and do u have to take the wheel off to
access it?
I usually spray the BJ with rust cleaner and then after i take the nut and
pin off i give it a “love” tap with a hammer. It always pops out and is fun
😀
What jack did you use to load the suspension and where are they sold?
have you ever dammaged the balljoint gater by using this air gun to
saperate BJ from the hub?
what is it when you hit normal bumps in the road and you hear an rattling
noise.
If you do not load the suspension and then tighten down the bolts, they
will try and retain the same uncompressed position with the load and wear
out quicker.
I want you to be my mechanic!!!!!
There are actually several different things that can cause a rattling in
the front end. You will want to bring the vehicle into a local shop and
they can assist you in getting everything checked over and diagnosed.
Why do you need to load the suspension before tightening the two bolts?
Thanks.
No you should be fine. 1aauto.com 888-844-3393