http://www.1aauto.com/1A/HeadLights/Honda/Accord/1ALPP00084 1A Auto shows you how to repair, install, fix, change or replace a parking lamp assembly or for j…
http://www.1aauto.com/1A/HeadLights/Honda/Accord/1ALPP00084 1A Auto shows you how to repair, install, fix, change or replace a parking lamp assembly or for j…
You must be logged in to post a comment.
Hell do you guys have a video on how to install oem fog lights for this car
?
How bout an 89 Honda?
I cant seem to find the right bulb size the chart on sylvania seems to be
incorrect
the video link doesn’t work : S
You may be able to reach in back of the headlight to change the headlight
bulb. You might need to remove the battery on one side if you can’t fit
your hand in the back to remove the bulb.
The screw holding in the turn signal seems to be rusted, any advice for how
I can get it out?
If you type this in Google it will come up for you. e-Z3X9vFQ4Y
This video will show you how to accomplish that. Hope this helps you out.
youtube.com/watch?v=S8-p2ezZv_8&feature=plcp
You guys are awesome, thanks for the 411
Thank you very much. Helped alot!
@YouCanMakeItCrafty You could try to use some penetrating oil on it. that
might help to free it up.
@MrAdamsJ2 The removal process would be the same.
The only other place that you could possibly find a new one would be
through the dealer but it will most likely be a harness with several other
connections tied into it.
@MERALYify You might want to check for a bad ground, or possible bad relay
somewhere in the wiring.
Great video. Saved me a ton of time and work; plus, you guys were the only
folks on the web offering this information for free.
very helpful.. thank you
Solved my problem!
Thanks for the reply and the video.. What about changing the upper blinkers
in the front, is that hard to do?
We sure do. Here’s a link to it on our channel. We also carry the
replacement headlights and turn signals for your 94-97 Honda Accord on our
website 1aauto.com 888-844-3393 Video
youtube.com/watch?v=e-Z3X9vFQ4Y&feature=plcp
Can you do a video on how to replace the low/high beam bulbs of the
headlights? Or is it pretty straight forward?
This is great for the easy side but what about the hard one, the passenger
side?
Mine were very, very rusted, to the point I had to [carefully] drill the
screw out. Then after replacing the bulb, a couple of dabs of clear silicon
seal around the orange housing secures it back in place. I’ll just use a
razor knife to cut through it to get access again, if I ever have to.
Thanks for the video.
thanks again for the video – different car and problem this time
my car signal ligh stays on when i shut my car off what can couse this.
EXACTLY what I was looking for! Sure beats the old diagrams in the manuals!
Thanks!
Thanks for the tutorial
Hey great video but could you guys tell me where i could get the plug that
the bulb housing connects to? Behind my turn signal reflectors all I have
is cut off wires.. I need the connector that hooks to the back of the bulb
housing, with pigtail wires coming off.. any ideas on where to get this
other than a pick-apart?
Thanks for watching. Have a great day!
That IS the passenger side. Did you mean the drivers side? It’s the same.
At least it is on my 97 Accord SE.
Exactly the help I needed. Thank you guys. Sweet video.
Glad to help! Just keep us in mind next time you need a part. Thank You!