http://www.1aauto.com/1A/BrakePadAndRotorKits/Honda/Odyssey/1ABFS00855 1A Auto shows you how to repair, install, fix, change or replace your own worn, squeak…
http://www.1aauto.com/1A/BrakePadAndRotorKits/Honda/Odyssey/1ABFS00855 1A Auto shows you how to repair, install, fix, change or replace your own worn, squeak…
You must be logged in to post a comment.
){kind=link}
We’ll keep this request in mind in the event that we need to make this
repair on this particular year Honda Odyssey. We do carry a nice brake pad
and rotor kit for it on our website 1aauto.com Part Number: 1ABFS00883
888-844-3393
Great video .. Can you do one for a honda odyssey 2007 brake pads and
rotors?
You may have a burnt our light on the left side of the vehicle. Usually
this is why the turn signal doesn’t blink. Check the turn signal and brake
light bulbs to see if they’re blown, and need to be replaced. Hope this
helps you out. 1aauto.com 888-844-3393
I saw ur video a minute ago but not for this one. For another for replacing
your signal stick for lights. My question is. Is it the stick? Or is it the
light? When i puy my signal to the right it flickers fine and give signal.
But when i do it to the left. My signal light stays on and doesnt fliker
the signal that im turning left………. help?
Great Video! Are you going to have a video for how to replace Motor mounts
and bushing for Odyssey 99-04?
like to know why truck keeps stopping on me after driving 2 miles, and then
it starts after I wait 30 minutes again, changed fuel pump and filter,
HI Shaun, You may want to pull the code from the computer, that should tell
you exactly what has failed and is causing the light(s) to come on.
You may want to check the catalytic convertor to see if it’s clogged, if it
happens afte rthe truck heats up. Also check for a loose or corroded
connection to the battery and this may also be causing your issue.
hi there, like your vids, i have a 2005 grand caravan and the abs, brake,
and trac off lights are on. the brakes still work but i dont know why those
lights are on?
Would like to have seen safety glasses used when pounding metal on metal.
Very informative. Thank you
If we need to make this repair in the future we’ll keep this request in
mind. 1aauto.com 888-844-3393
Great video…. you take all the fear way….
Yes it’s always a very good idea to wear eye protection.