How To Install Replace PART 1 Turn Signal Wiper Switch Chevy GMC Pickup Truck 88-98 1AAuto.com

How To Install Replace PART 1 Turn Signal Wiper Switch Chevy GMC Pickup Truck 88-98 1AAuto.com

http://www.1aauto.com/1A/cruise-control-lever/Chevy/K1500-Truck/1AZCC00007 1A Auto shows you how to repair, install, fix, change or replace a broken, damaged…

145
Like
Save


Comments

1aauto says:

Thanks for checking us out on YouTube. Have a great day. 1aauto.com 888-844-3393

David Kuhn says:

You guys are the greatest . Thank you for the great parts an info. Your tec made it simple to under stand even my 18 year daugher under stood him.

505197 says:

I believe you’ll find you have a bad ground. Those light housing circuit boards are notoious for failing.

westsideoutlaw956 says:

Do a video on 89 Chevy silverado short bed really would appreciate some help

1aauto says:

Si usted toma los cables de la batería fuera, que debe estar bien.

Jorge Muñoz says:

como se saca el volante de una tahoe 98???? tengo miedo de que se active el airbag

1aauto says:

En este momento no llevamos un interruptor de señal de giro para ese vehículo en particular. Gracias por visitarnos en YouTube. 1aauto.com 888-844-3393

edufrank vera says:

hola amigos tengo una gmc blazer sierra clasicc del 82 y necesito sacar el volante para comprar un suiche nuevo como lo puedo sacar gracias ???

1aauto says:

Check the turn signal bulbs first to see if any are burnt out. If there is a burnt out bulb replace it. If you still have an issue it could be a bad brake light switch or a bad turn signal switch. Make sure the wires coming off of the brake light switch are not frayed and touching metal creating a short. Hope this helps you out.

42n3quarters says:

i have a ’96 k1500, i have tail lights sometimes but when my headlights are turned off and my driving lights/day runners are on my turn signal works fine until i press on the brakes. once i hit the brakes my turn signals speed up and my rear turn signals change sides. ex: left turn signal normal speed, hit the brakes, front turn signal fast flashing, rear RIGHT turn signal fast flashing. i dont think it’s a short because it only does this sometimes so would it be the switch or a short?

nomiclas says:

it appears you have a “Jones”for 66 GTO’s.my year is 67.do you have options on your convert supplied by Northern Michigan Classics?over the last 30 years I’ve optioned and assembled more than a few.

Steve talk says:

I worked on getting the airbag for an hour. it would help to show how it is retained and describe the “slot” a bit better. show what you were pushing on after it is out. The rest of the video is great. 

1aauto says:

If you can see where it is suppost to go an connect to, there has to be a clip or something that holds it in place that may have worn out.

R4BIDB3AN3R says:

I have an 89 pontiac firebird and the rod that connects to the headlight/blinker lever isnt connected to the lever and whatever its supposed to be connected to in the steering column. How do i fix this? Or do i need to take it in to a profesional?

1aauto says:

HI Burt, This part was used in the 96-99 GMC Safari Van, so it should be similar to the video. We carry this replacement part on our website 1aauto.com 888-844-3393

Burt0351 says:

I have a gmc safari van is it similar?

1aauto says:

You may want to check to see if there’s a piece of debris stuck in there.

1aauto says:

It wasn’t working correctly.

1aauto says:

You may want to check the bulbs to see if the filaments are burnt out. If could also be an issue with the switch.

sgtshultz44 says:

My high beams quit working. low beams are working. thoughts?

deandre massey says:

for what reason did you change the turn signal switch?

soledeth says:

I have 2000 gmc Denali automatic and my shifter gets stuck on parking every time I put it on parking you know what could be this issue?

braxxtonn says:

how was it doing ur switch on ur 94??????? i gotta do mine ,, thanx


1aauto says:

Unfortunately we are working on other vehicles at this time but we will keep this in mind for a video later on down the road.

Javier Duarte says:

could you or do you have a video on how to take off a broken key lock ignition cylinder?

TheDirectorPro says:

will this work for a 99 chevy tahoe. i need to get a new emergency button that broke

1aauto says:

Usually the switch wears out inside.

MonteCarlo713 says:

How can I determine if its the actual lever itself or if its the motor?

1aauto says:

The turn signal switch on your 1993 S10 should be different than the one shown in the video. It may be a different process to remove it.

1aauto says:

Your Astro van does use this same part so the process should be the same or very similar. We carry new replacement turn signal switches on our website 1aauto.com for your Chevy Astro van. 888-844-3393

princesscupcaketatto says:

will this work for a 1993 s10 pickup truck? Thank you.

sagefoole says:

I hope it works for my 94 Silverado…

1aauto says:

It is similar but there is a difference between the two dash boards so the install might be slightly different. To see if the switch is the issue or the motor, you will have to test the connection at the motor to see if the motor is getting power. If there is no power, there is either a issue with the switch or the wiring.

Write a comment