http://www.1aauto.com/1A/Axleshaft/Chevy/Silverado/1AACS00008 1A Auto Shows you how to install, repair, fix, change or replace a front axle CV joint. This vi…
How To Install Replace Front Axle CV Joint Chevy Silverado Suburban GMC Sierra 00-07 1AAuto.com
181
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
If it’s not a crew cab Part Number: 1AAHK00002 on our website 1aauto.com, we can also give you current pricing over the phone . 888-844-3393 Thanks for watching. Have a great day.
Price for a pair of shafts for 2003 sierra 1500 Z71?
If it tends to dart to the side when the brakes are applied, you may want to check the brake calipers to see if they need to be replaced. 1aauto.com 888-844-3393
Ok. Can you tell me what would make my truck hard to control over rough road? It seems to want to go left or right easily especially when braking on rough road. Is this something that bad CV joints would cause?
You may hear a thumping noise while you’re driving, or maybe even a popping noise when you turn. If you can move the axle up and down quite a bit, it may need to be replaced. Hope this helps you out. 1aauto.com 888-844-3393
What are signs of bad CV joints?
Thanks
They should be similar. You should be able to apply some of the basic steps shown in this video to your application. 1aauto.com 888-844-3393
Are both sides similar to change and would a 1500 Silverado be like this. Thanks
If only one has gone bad you can change just one.
You may be able to apply some of the basic procedures show in this video to your application. We currently do not have an auto repair video on that particular year. We’ll keep this request in mind in the event that we need to make this repair in the future.
Would this replacement work on a 94 k1500?
quick questions do you have to change both cv joint axles are just one
thank you
I wann a say thank you 1A Auto – for this video
You should torque that nut at the correct torque setting. It’s a matter of safety, and your hub bearings may wear prematurely if the nut isn’t torqued right. HarborFreightcom carry’s decent tools that do not cost a great deal of money. You might want to see what they have. 1aauto.com 888-844-3393
is it bad if i dont torque the hub nut cuz i dont have a torque wrench
Can I expect a similar process on my 05 trailblazer? Thank you
It it’s a 00-07 then it should be the same or very similar.
will this work the same on a z71 silverado 1500 ? i thought i had take the upper ball joint lose from the spindle or whatever
very good video awsome
You should need to to gain the clearence.
its it absolutely necessary to take off sway bar bolt? is there a purpose or make it easier? mine looks stripped and i don’t want to deal with it.
There could be several things going on which could include the springs, wheel bearings, or something to do with the sway bar links.
This is a great Youtube channel and a great video, I have a 2001 gmc sierra 5.3 sle 4wd and my truck has been making noises when I turn the wheel to the right. Its making that “old spring mattress”noise when i crank the wheel and my truck makes a sqeek noise when i drive at 20- 40 mph, almost like the brakes need to be changed, but i already replaced them. What should I do? thanks
Thanks for checking us out! Have a great day!
This is seriously the best youtube channel out there!! Thanks!
Good Video…. Helped Alot… Thanks
It really depends on what the hourly rate of the shop is.
How much should something like this cost to repair at an auto shop…
You may want to check all of the suspension parts. The ball joint could make a popping sound if they are going bad.
I have a “popping” when i steer my 2002 Silverado could these be the culprit or is it the ball joints?
You may be able to apply some of the basic procedures shown to your 98 Blazer.
Do you have a video showing the driver side shaft? Can I replace it in the same manner as this on a 98 Blazer? I am told the driver side shaft has a retaining ring that I can just pop out and pop in a new one. Am I way off here? Love your videos. Thanks!
Normally you can tell a CV joint is bad when it has a lot of inside play. The issue could also be the Differential bearings inside the axle itself. Removing the front cover will give you a good idea of what is going on internally.
How can you tell the difference between a bad front differential and/or it’s bearings and a bad CV joint? I’ve had a low growl that gets worse with speed. I’ve replaced both front HUB assemblies and taken out both CV’s, but they don’t feel bad. If you’re holding one in your hands, how can you tell one is bad?
It could be the u-joint in the axle or a wheel bearing.
hi I have a 2001 gmc sierra and the left front axle is making noises, what is it?
just the bearing or the differential problem
Thank you for visiting our auto repair channel on YouTube. Have a great day 1aauto.com 888-844-3393