Thank you for posting this video! You saved me about $250 and several hours
of my time. It took about 20 minutes to change both headlight bulbs. I
really appreciate you for doing this!!
THANK YOU!!! Thank you, thank you. Just replaced bulbs on my wife’s Denali
according to your instructions and I can’t thank you enough for saving us a
lot of money and just now right before Christmas. My kids thank you also!!
Daddy is a hero!!
Haven’t changed the headlight yet, but your video has confirm that this is
definitely at doable project!! like everyone else that has commented hear
what I thank you for taking the time to do this! hopefully people will
continue to use you too for this purpose and we can all continue to help
one another and stop wasting money at dealerships who overcharge.
Excellent instruction..Thanks for taking the time to shoot this video.
Installed H13 Bulbs..Used a 7mm and 10mm sockets, flat screw driver and
needle nose pliers..
Just watched your video and replaced a headlight bulb on my 2008 GMC Yukon
XL. Saved me a half day at dealer and a $300 price tag – all for a $16
bulb. Thanks man.
These instructions were perfect. I followed them exactly and changed both
headlights in under an hour. In fact it only took that long because I
watched the video several times to ensure I removed the correct screws.
Thanks to the OP.
Mr D. Thanks for the video. I recommend to get the H13 bulb. I went to the
store they sold me the wrong one. So it took me double the time to replace
both bulbs. The socket size for the two different screws are 10 mm and 7 mm
. The hardest part was to figure out how to remove the bulb out of the
socket . I just had to squeeze the grey part of connector . thanks for
saving me money
Thankful for your video! Sad that I have to get under the tire 🙁 I took
the two bolts off of the top and couldn’t find the bottom bolt. I didn’t
want to get underneath if I didn’t have to.
){kind=link}
Nice video! Smart guy.
Thanks for taking time to post. Nice to know where the bolts/pins are
before you start. This is the best thing about YouTube!
This is the way that whoever makes these headlamp assemblies for GM, they
are all designed that way with the third bolt under the wheelwell.
Thank you sir! You literally cut down my installation time to under 20
minutes! Your help is greatly appreciated!
Thank you for posting this video! You saved me about $250 and several hours
of my time. It took about 20 minutes to change both headlight bulbs. I
really appreciate you for doing this!!
Would have never found that wheel well bolt. Thanks!
Thank u! Thats awesome and easy
Finally some1 that can explain what I need. THANKS
Wow- Thanks so much…. really needed that
Thank You Sir for your video. It saved me about $80.
Glad to help.
THANK YOU!!! Thank you, thank you. Just replaced bulbs on my wife’s Denali
according to your instructions and I can’t thank you enough for saving us a
lot of money and just now right before Christmas. My kids thank you also!!
Daddy is a hero!!
Haven’t changed the headlight yet, but your video has confirm that this is
definitely at doable project!! like everyone else that has commented hear
what I thank you for taking the time to do this! hopefully people will
continue to use you too for this purpose and we can all continue to help
one another and stop wasting money at dealerships who overcharge.
Thanks for the video!
Thanks Bro. Kept that paper in my pocket by avoiding the dealer. Put in
some ultra white headlights while I was at it. Thanks.
Awesome. Thanks for posting!!!
Thx for posting. U just saved me a few bucks and some frustration. 🙂
No problem! Glad to help.
Thanks! That book that the dealerships use to charge labor is a license to
steal.
Thanks!!
Dude, Thanks I just left the dealer and was floored when they told me the
price.
Excellent instruction..Thanks for taking the time to shoot this video.
Installed H13 Bulbs..Used a 7mm and 10mm sockets, flat screw driver and
needle nose pliers..
Thanks for taking your time to post this! Huge Help!
Much appreciated
Thanks man! I didn’t want to have to take it to the dealer like the manual
says!
I appreciate the video. GM didn’t make this very practical, did they.. Msg
me so I can send you a bev mo gift card.
Wow! why do they make it so difficult! Thanks for posting that just made my
life better. Do you feel the factory headlamps are very dim as I do?
Just watched your video and replaced a headlight bulb on my 2008 GMC Yukon
XL. Saved me a half day at dealer and a $300 price tag – all for a $16
bulb. Thanks man.
Perfect video with just the facts. I replaced both headlights in my Yukon
XL quickly and easily
Thanks a lot! You’re video was exactly what I needed. My Yukon is even the
same color as yours!
thanks a lot
Saved me a lot of time and a trip to the shop! Thanks dbalargin.
These instructions were perfect. I followed them exactly and changed both
headlights in under an hour. In fact it only took that long because I
watched the video several times to ensure I removed the correct screws.
Thanks to the OP.
Thank you..I was having a hard time trying to change the bulb…thanks
again..
Thank you so much for this info..
Thank you very much, worked like a charm!
Mr D. Thanks for the video. I recommend to get the H13 bulb. I went to the
store they sold me the wrong one. So it took me double the time to replace
both bulbs. The socket size for the two different screws are 10 mm and 7 mm
. The hardest part was to figure out how to remove the bulb out of the
socket . I just had to squeeze the grey part of connector . thanks for
saving me money
Thankful for your video! Sad that I have to get under the tire 🙁 I took
the two bolts off of the top and couldn’t find the bottom bolt. I didn’t
want to get underneath if I didn’t have to.
Thank you so much!