http://www.1aauto.com/1A/cruise-control-lever/Buick/Century/1AZCC00002 1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, fa…
http://www.1aauto.com/1A/cruise-control-lever/Buick/Century/1AZCC00002 1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, fa…
You must be logged in to post a comment.
HI Jim, It is Part Number: 1AZCC00002 if you click on the link in the video, it will also bring you to the auto part being installed in our video, to our website where it’s also for sale. Hope this helps you out. 1aauto.com 888-844-3393
What is the part number on your website?
We currently do not have an auto repair video that shows this particular repair. 1aauto.com 888-844-3393
hey how do i change the switch ignition for a 85 cutlass salon
If the new switch is hard to turn and not is not changing the settings over, then you will have to probably replace the switch again.
The replacement between the two vehicles are going to be similar.
6 months ago i installed a new cruise switch. lately turning the wpers on and off has been difficult to twist, and today the wipers are stuck on and although i can twist the switch arm, they stay on.
is it possible the new switch is faulty, (i notice the switch metal arm plugs into the steering column), or do you think my porblem would actually be the wiper switch mechanism inside the steering column ? (which really looks like a pain to get at. )
thanks for your help. 1990 k1500 chevy 4×4
I’m about to order a new wiper/cruise arm from you, this video looks similar to what I have. 1987 S10 Blazer. Is the replacement process the same?
Well i just saw my brake lights work but only when the truck Is off
Might be that, or you may want to check the fuse and the wiring to see if the bulbs have power to them.
Brake lights don’t work but the cargo brake light does could it be the stalk or what
We currently do not carry a turn signal lever for this application. It might be a similar process.
How to replace turn signal wiper stalk cruise lever for Chevy caprice 95
If ti’s broke and needs to be replaced we carry new ones on our website 1aauto.com 888-844-3393
I have a 2001 z28 and my brights don’t work because of the stalk beeing loose? what do I do?
I would replace ALL of the fluid in the transmission and put a new filter in it.
The transmission fluid in it is black and burnt looking but it is running really good still, am i gona need to get the transmission fixed or just replace the transmission fluid?
If you have a test light, test the wire going to the sockets to see if there’s power to the sockets when you step on the brake.
Thank you for visiting our channel on YouTube, we currently do not have an auto repair video that shows this particular repair.
It could be worn out, you might need to replace the switch.
I have an 89 firebird and when i pull back the bright light switch it doesnt click and stay back and i also noticed that a little rod is loose by it??? How di i fix it?
I have 1985 c10 Chevy need help on how to change the light dimmer switch I believe it with the turn signal stick neeh your help thanks.
The brake switch is good i just changed it so what can it be
The brake light switch is good i changed it just 2 days ago.
You may want to check the brake light switch to see if it’s working correctly. If it’s bad it may also correct the turn signal issue.
My 1990 chevy turn signal or brake light dont work. But hazard lights work and all light work and Fuses is good. Whats the problem?
We currently do not have an auto repair video that shows this particular part. We’ll keep this request in mind during any future repairs.
my washer lever broke in my 92 chevy truck how do i can replace it
It could be a bad switch.
my wipers only run on high and none of the delay settings, is that the switch i need to replace or do i need to go further in the column
We currently do not have one listed for that particular vehicle. The one shown in the video is different.
I have a 92 Cadillac Deville, on the exterior, it looks simular to this, will this stalk work on a Cadillac? It has cruise, wipers, turn signal functions on it. It does say Buick though on here. I know there is some commonality with most GM divisions.
You’re welcome. Have a great day. Thanks for watching out video.
This helped more than the others. I have a 92 chevy k 1500. The other videos were on newer trucks. Need to replace switch due to wiper issues. Happened to fix motor by replacing before knowing about the switch as a possibility. Thank You!
I would test the socket that the light plugs into to see it it’s a bulb issue or possibly a bad socket. If the socket isn’t blinking, also test the wire going to it to see if there’s power in the wire. if there is and there’s no power in the socket, you may have a bad socket. Also check all of the bulbs front and rear to see if any are burnt out.
There would be an issue with the switch, or if the headlight bulbs were replaced you may want to make sure that the correct ones were installed, as that could also create this type of situation. Hope this helps you out.
i did i replaced the whole part of the blenkers and the hazzerd switch and they still dont work and the fuses work i checked them
Well my.problem is.my.bright lights don’t turn off. What do I do. Please email me someone. bigjcamon@gmail.com
That application looks as though it uses a different style of switch. The basics might be similar.
You may want to test the turn signal by putting it on and then testing the socket to see if it has power going to it. I would also check the fuses to see if you have a blown fuse.
Yes I have a probablem My blinkers don’t work only the hazards work I replaced the turn single part and they still don’t work I have a 2000 dodge dakota v6 truck eny help please thanks 🙂
Would this be basically the same procedure for an ’88 Buick Electra/LeSabre Estate Wagon?
Thanks
That function is part of the switch also, and could wear out.