IF NONE OF THESE 4 WAYS WORKED FOR YOU, THEN YOU WILL NEED TO DISABLE THE PASSLOCK, HERE IS A LINK THAT SHOWS YOU EXACTLY HOW TO DO SO (works on any gm car)….
4 Ways to Disable-Deactivate the Anti-theft on GM cars-Chevy Malibu
108
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
The first way listed to fix the issue worked for me. Thanks for the vid!
i did it today and it’s work. on a chevy malibu 01 i cut the smaller yellow
wire.
next step, the ignition switch kill
How would I do this for my 1996 Pontiac Grand Am SE?
thank you
Any suggestions for a 2000 cavalier j body?
If you do the toggle, and try to start the car and it does not start, then
flip the toggle switch and attempt to start the car. When the car starts,
and while it is running, flip the toggle switch and leave it alone. It is
fixed UNTIL the battery is disconnected. If you disconnect the battery for
any maintenance, you just flip the switch, and start the car, then flip the
switch back. GM has this fixed documented for their Trucks with the
autostart feature, and if you search for that, you will find the technical
steps to do this. I had a 2001 Malibu and this solution worked awesomely.
Awesome !! Thanks and hope this make it work on my friends car ..
Awesomee, the second option worked for my moms car 🙂 thank a bunch
Thanks from me, too! Number two was the one. Vrooom.
Thank you sooo much! This happened to me before on my 2005 Cadillac CTS..
Had it towed, then the repair people called me up they told me they didn’t
do anything they just charged it and it worked. When my ex picked it up it
still didn’t work. They called me the second time they said it worked. We
went there and it worked (didn’t pay for anything) that was Sept 2013 and
this weekend (Snow storm in va). Anti-theft just came up. Every time I do
somethine “Extra” for my car like clean it up. All I remember doing was
opening the door then turn the car on it wouldn’t turn on. I tried the 30
min one (10 mins x 3 etc).. removed the fuses, removed the battery, all
failed. Then your 2nd one fixed it. which is by the way what started it in
the first place (leaving the door open then start the car). Also I think
me carrying too many keys with my car key didn’t help. Again thank you sooo
much! Sorry for the long reply.
Thank you very much and please pay no attention to the idiots that don’t
get it
If my stock radio on my 2002 olds alero is locked due to the anti theft
lock system will the last procedure maje my radio work again? We switched
out the module from a different alero which is what caused it to be locked.
Thx really helped out
Just need some clarification. You must disconnect the negative battery
terminal before splicing the yellow wire and adding the toggle switch,
correct? Just asking because another video says that the car must be
running while this procedure is performed. Thanks!
do you know how Deactivate the Anti-theft on saab 9-3
it would have been nice if he would have explained it by voice!
I was stranded for 6 hours because my anti-theft is malfunctioning. I tried
the first 3 of your recommended options without any luck…the beast still
would not start. Luckily, 2 guys came along and this is what they did….
1. locked the vehicle with the remote, pressing the ‘lock’ button twice
until you hear the horn give a short beep 2. unlocked it with the remote 3.
started the vehicle PS – your link is no good. :/
i have a yukon and the security always been on but theres time that i could
start the vehicle but theres times when i cant any suggestions?
I have tried all except the toggle switch. I would prefer to completely
disable. Can you provide a working link to instructions on how to
completely disable the Passlock Security System, please!! Thank you for
providing this! It is very beneficial information!
Very good.
I did exactly the same way you showed to install a toggle switch on my 02
Malibu, when I switch the toggle switch to OFF the Anti-Theft light comes
on, but the car will never start.I have to leave it at the ON position to
start the car. In your video you said “if you just cut off the yellow wires
in half without using a toggle switch, you will still be able to start the
car ……” Could you please let me know in my case why it does not work?
Thank you.
I heard you have to get “spst” toggle switch; thanks for making this vid
too btw I can see the wire perfectly
why use a switch? can’t you splice the wires together, or use a resistor?
Thank you, very helpful. Happy holidays!