Buy Now!
New Control Arm from 1AAuto.com http://1aau.to/ia/1ASFK02258
In the video, 1A Auto shows how to remove and replace a rotted, rusted, broken or bent rear lower control arm. The video is applicable to the 00, 01, 02, 03, 04, Ford Focus.
🔧 List of tools used:
• 19mm Wrench http://1aau.to/ojn/1AXAA00010
• 15mm Socket http://1aau.to/oLd/1AXAA00015
• 18mm Socket http://1aau.to/okV/1AXAA00043
• 19mm Socket http://1aau.to/okV/1AXAA00043
• Ratchet http://1aau.to/oVR/1AXAA00016
• Socket Extensions http://1aau.to/oLd/1AXAA00015
• Torque Wrench http://1aau.to/ooX/1AXAA00044
• Marker / Writing Utensil
• Floor Jack http://1aau.to/onn/1AXAA00068
• Jack Stands http://1aau.to/onu/1AXAA00065
For More Info visit us at http://1aau.to/h/bNj/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
coulda just put bushings in no other part needed.
Is there any reason why you wouldn't use a coil spring compressor in this situation?
Thanks for the vid. I couldn't help but notice the sway bar is absent. Is it only installed on certain vehicles?
Does it include those coils too? Idk where to buy them
What is the hardware for replacement?
do you not use copper grease bolts so next time it is easy to take off, by the way cool video. from London .UK
Serious brand new bolt in that arm no way ! Everyone I have done in the last 18 years has been seized !.
This mechanic is awesome! Informative and A great help!!
That bolt you marked is for toe or camber adjustment? Thanks.
The smaller rear lower control arm bolt that bolts into the rear knuckle near the brake drum keeps spinning and won't come out removed the nut and bolt on the chassis side no problem there , the nut is off and it got soak with about two gallon of WD 40 and the stupid bolt won't come out any suggestions help would be deeply appreciated