Car Fix DIY Videos

Buy Now!
New Pitman Arm from 1AAuto.com http://1aau.to/ia/1ASPA00007

This video shows you how to install a new pitman arm on your 1997-2003 Ford F-150. A bad pitman arm can cause poor steering response, wandering, pulling and uneven tire wear. It can also be dangerous.

This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150

Tools you will need:
• 10mm Socket http://1aau.to/ofJ/1AXAA00017
• 21mm Socket http://1aau.to/ocQ/1AXAA00043
• 24mm Socket
• 32mm Socket http://1aau.to/ok/1AAST00003
• Straight Cutters
• 1/2 Inch Breaker Bar http://1aau.to/oae/1AXAA00078
• 3/8 Inch Breaker Bar
• Torque Wrench http://1aau.to/oed/1AXAA00044
• Brake Grease

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Ford F-150 10th Generation 1997-2003: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9uQBE2YkzIRZNEIPqv8pxk

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.