Buy Now!
New Headlight from 1AAuto.com http://1aau.to/ia/1ALHL00389
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights on your vehicle. This video is applicable to the Ford Crown Victoria, years 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oYN/1AXAA00013
For More Info visit us at http://1aau.to/h/aI5/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
On my 2004 crown Vic I’ve took the bars off an it still want slide out for some reason the adjusters are blocking it from coming out an I can’t get the plastic peice too come off the adjuster can any body help me with what I’m doing wrong
Thanks for the video! The headlights on my soon-to-be Grand Marquis are quite sun-beaten so I'll be replacing them as soon as I hand over the check!
The instructional part was awesome! The intro with the convertible was unnecessary, drawn out and had horrible audio. You really didn't catch that when you were editing? I would cut it completely out.
My headlights assembly housing keeps kinda just laying on the bumper which causes the beam to point at the ground way too low help ?
kool , thanx
Thank you for this great video.
My hesdlight housing are loose… any way i can get them to be snug fit? The retaing clips are perfectly installed… dont know how else to tighten them and not be loose… thanks fpr any feedback.
I bought a pair of FR232-B001R which says 98-2011 for my '09 interceptor, found where it even says my exact model is listed… they just don't fit at all for some reason
Is it safe to put oil on the retaining clips to help avoid damage when removing them?
Thank you for the great videos – I just replaced my headlight and front marker light and thanks to your clear instructions, was able to do it quickly and save a ton of money.
Does anyone knows where i cen get those tabs?
Great video.
Can i do the same thing on a 2008?
Mine has screws holding it on
I've got a 05 crown victoria I just changed the bulbs to my headlights. Both low beams work fine but the high beams not so much the left high beam goes on but the right doesn't. What could be the problem?
short, sweet, and clear. thank you very much.