Buy Now!
New Sway Bar Link from 1AAuto.com http://1aau.to/ia/1ASSL00075
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 05, 06, 07, 08, 09, 10, 11, 12, Ford Escape
🔧 List of tools used:
• 15mm Wrench http://1aau.to/obI/1AXAA00010
• 17mm Wrench http://1aau.to/obI/1AXAA00010
• 15mm Socket http://1aau.to/oiL/1AXAA00015
• Torque Wrench http://1aau.to/odk/1AXAA00044
• Rust Penetrant
• 4mm Hex Wrench
• 5mm Hex Wrench
For More Info visit us at http://1aau.to/h/byp/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
excellent video and instructions thank you / merci , make sure the threads are clean on the old parts as the nut will be difficult to remove
I replaced these, with the exact same product. I had issues with the nuts coming off, i'm not sure why. I ended up placing my old swaylinks back in. If I attempt this replacement again i'm going to try and use lock nuts.
Thank you for this valuable tutorial.
Is there video for rear sway bar links
How do you do it with a floor jack?
Pre-greased?