How to Replace Front Brakes 97-03 Ford F-150 4×4

How to Replace Front Brakes 97-03 Ford F-150 4×4

Limited Time: Get $10 Off Your Order

Buy Now!
New Brake Kit from*/i/1ABFS01788?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=7p7Q1AI9qoQ

1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to 97, 98, 99, 00, 01, 02, 03 Ford F150

🔧 List of tools used:
• Flat Blade Screwdriver
• 13mm Socket
• 18mm Socket
• 19mm Socket
• 1/2 Inch Breaker Bar
• Ratchet
• Torque Wrench
• Drill Bit Set
• Anti-Seize Grease
• Block of Wood
• Brake Parts Cleaner
• Bungee Cord
• Paper Towels
• Safety Glasses
• Floor Jack
• Jack Stands
• Large C-Clamp
• Wire Brush

For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



Truman Gosling says:

Will this video work with 2 wheel drive truck?

Omar Cuenca says:

if its abs do you have to leave the bleeder valve open when doing this?

Danny Fallahi says:

What size is the bolt that middle one

A & T Tech Outdoors says:

Good video Thanks.

Tom Smith says:

Geeezz… The inner pad actually fell off!!! So the pistons got a little worn and one will not go back in… I'll try loosening the bleeder screw slightly.. do the pistons need to be replaced now??.. I'm sure it would be best….. just trying to get off cheap… broke until Friday.. lol

Kevin Felt says:

Best auto parts company hands down.

R. Ive says:

He forgot to mention to open the lid of the brake fluid refill and/or removing some brake fluid before pushing the calipers back with the C clamp.

John Ross says:

Thank you. That's was perfect. Step by step.  thank you. I hope the rest of your videos are that clear and easily laid out.

Rene Nunez says:

Tank you gracias

Greg Benwell says:

I clean those slider pins with rifle brushes myself!! Trust me they work wonders!!

KrashTWazo says:

great idea on the drill bit slider chase!!

James Waldon says:

Do you have to bleed them after finished or is just pumping the breaks good enough

Albert Ortega says:

Thanks so much for the videos!

Jose Avilez says:

Great video , question cz I want order rotors n brake but u store only show for 4 wheel drive brake n rotor and my truck is 2 wheel drive
There is any different between 2 wheel drive and 4 wheel drive brake and rotors

Paul Sleeper says:

Do you have a video for the rear wheel drive front rotor? Is there much difference?

Dale Allan says:

Best automotive videos on the internet. Straight, simple and to the point. Thank you so much for these videos!

gold acre says:

its a great job right here

Comments are disabled for this post.