Buy Now!
New Temperature Blend Door Actuator from 1AAuto.com http://1aau.to/ia/1AHCX00284
The temperature blend door actuator is the electric motor that is responsible for physically opening and closing the blend doors in your vehicle’s HVAC system. If the actuator isn’t working, then you won’t be able to control the temperature of the air coming out of the vents! This video shows you how to install a new blend door actuator on your 2006-2010 Ford Explorer.
• Check here for more videos on the 2006-2010 Ford Explorer http://www.youtube.com/playlist?list=PLJVpHWuCEUX-sSbeQ6546V1JGXD0O_VfP
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
This is great but how are you supposed to get to the passenger side one for a dual control system? This video is very helpful, though. Thanks!
If the plastic pin doesn’t fit immediately, one thing I found that works is plugging the actuator in but not installing it and turning the key to the on position so you can turn the temperature gauge, in turn, spinning the pin
There's a 3rd bolt on my 2006. You have to take a little more out to get to it.
Super helpful thanks dude! Way eaiser then I thought it would be.
If at first it doesn't come off, check for a 3rd bolt on the side facing the rear of the car. Thanks for the video.
Perfectly helpful!! Thank you!!
I’m glad I came across this video it looks much easier than another one that I viewed. The other video has you take out the entire console. Thanks for the information.
I replaced mine because it wasn't blowing hot air only cold air and now is blowing hot air only any ideas ?
Thanks for the vedio
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I see some familiar faces on this channel. Is it same group of people from 1A Auto?