Check out my How-To video for the Headlamp removal steps first. T30 Torx Bit or Flat-Head Screwdriver is all you need. http://youtu.be/Ota7jQ7Iu88 How to rea…
Check out my How-To video for the Headlamp removal steps first. T30 Torx Bit or Flat-Head Screwdriver is all you need. http://youtu.be/Ota7jQ7Iu88 How to rea…
You must be logged in to post a comment.
There are two ways you can do… 1) Remove the whole front bumper cover and
unclip the bezel from behind the cover. 2) Leave the bumper cover on but
remove the whole front under-trays under the engine & radiator. Although
you have to lie on the floor afterward to unclip the bezel since the bumper
cover is on the car still.
Hi how do i remove the fog light bezel? Ty
Blue is not an ideal color for Fog Lights because it actually gives out
less visible light. Use either Cool White or Amber/Yellow color instead. If
your Focus is also using H11 bulb for Fog Lights, I’d recommended you go
search for “H11 CREE Q5 LED” bulb in White or Amber color….You won’t be
disappointed.
Hey moomo, what would you recomend I use as an led replacement bulb for the
focus foglight? I want to use a blue led if possible.thanks
Mine is a Ford Focus ST. But other than the drivetrain and suspension, its
exterior & interior is near the same to most other Mk3 Focus (2012+ model)
There’re already a ton of Ford Focus videos here for the exterior &
interior reviews, so I don’t need to duplicate those to bore everyone. 🙂
Unless you have something particularly want to check out (which is not
already on YouTube here).
have you experience moo abit of “noise” of some none smooth pavement
specially stone exposed from the concrete cement road? I notice it from the
from wheel sound like a lose ball joint or sort of like it.. =)
Hi moo can you video in deepth review of your ford focus exterior &
interior of your car? What trim level is that?
I haven’t brought my car to track or drag-strip to test out the actual top
speed. But this car can go triple-digit MPH too quick and easy on an empty
highway.
Glad my steps helped. You need to remove something in either way to access
the fog on this car, but I like access it from the top than from the wheel
well because it’s easier to see. Actually your speaker wire solution is
already good, as long as you taped properly in the wire-jointed area for
water protection.
how much top speed did you just run with your ford st moo?
I thought my fog light blew out since only one was turning on. when I
pulled out the light I discovered the wires that connect to my light got
pinched and cut on one side causing them not to work. your video made
things so much easier. anyways for now im using speaker wires to fix them
unless I can find a better fix