How to Install Replace Power Steering Pump Pulley 1998 Ford F-150

How to Install Replace Power Steering Pump Pulley 1998 Ford F-150
In this video, 1A Auto shows you how to install, fix, change, replace a power steering pump pulley for the 98 Ford F150

✔ List of Auto Parts from Related to This Repair:


🔨 List of Tools Used in this How-To Video:

• Flat Blade Screwdriver
• 10mm Wrench
• 10mm Socket
• 8mm Socket
• Channel-Lock Pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Cloth Rags
• Gloves
• Rust Penetrant
• Safety Glasses
• Wire Ties
• Drain Pan
• Floor Jack
• Funnel
• Jack Stands
• Pick

🔧 Instructions:

1. Removing the Engine Cover 0:20
2. Removing the Air Intake 0:42
3. Removing the Serpentine Belt 1:46
4. Draining the Power Steering Fluid 2:51
5. Disconnecting the Power Steering Fluid Line 3:23
6. Removing the Power Steering Fluid Pump 5:02
7. Removing the Power Steering Pump Pulley 9:04
8. Installing the Power Steering Pump Pulley 12:39
9. Installing the Power Steering Pump 14:39
10. Connecting the Power Steering Lines 17:02
11. Reinstalling the Serpentine Belt 18:48
12. Reinstalling the Air Intake 20:40
13. Reinstalling the Engine Cover 21:30
14. Refilling the Power Steering Fluid Reservoir 21:45

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



Write a comment